List of publications of an organisation

doctoral thesis
  Zhao, D (2009, December 7). Hierarchical EMC design for inverters in motor drive systems. TUD Technische Universiteit Delft (143 pag.) (Delft: D. Zhao). Prom./coprom.: Prof.dr. JA Ferreira & FBJ Leferink.

  Zhou, Y (2009, October 14). Wind power integration: from individual wind turbine to wind park as a power plant. TUD Technische Universiteit Delft (205 pag.) (Delft). Prom./coprom.: Prof.dr. JA Ferreira & Dr.ir. P Bauer.

  Kumar, P (2008, October 2). A framework for multi-objective optimization and multi-criteria decision making for design of electrical drives. TUD Technische Universiteit Delft (268 pag.). Prom./coprom.: Prof.dr. JA Ferreira & Dr.ir. P Bauer.

  Jong, ECW de (2007, January 9). Three-dimensional integration of power electronic converters on printed circuit board. TUD Technische Universiteit Delft (264 pag.) (Delft: ECW de Jong). Prom./coprom.: Prof.dr. JA Ferreira & Dr.ir. P Bauer.

  Morren, J (2006, November 13). Grid support by power electronic converters of distributed generation units. TUD Technische Universiteit Delft (208 pag.) (Enschede: Gildeprint b.v.). Prom./coprom.: Prof.dr. JA Ferreira & Ir. SWH de Haan.

  Pavlovsky, M (2006, September 11). Electronic DC transformer with high power density. TUD Technische Universiteit Delft (175 pag.) (Delft: M. Pavlovsk�). Prom./coprom.: Prof.dr. JA Ferreira.

  Gerber, M (2005, December 8). Electrical, thermal and spatial integration of a converter in a power electronic module. TUD Technische Universiteit Delft (320 pag.) (s.l.: s.n.). Prom./coprom.: Prof.dr. JA Ferreira.

  Popovic, J (2005, November 28). Improving packaging and increasing the level of integration in power electronics. TUD Technische Universiteit Delft (229 pag.) (s.l.: s.n.). Prom./coprom.: Prof.dr. JA Ferreira.

  Dubois, M (2004, January 26). Optimized permanent magnet generator topologies for direct-drive wind turbines. TUD Technische Universiteit Delft (270 pag.) (L�vis, Canada: Les Imprimeries ABC Inc.). Prom./coprom.: Prof.dr. JA Ferreira & Dr.ir. H Polinder.

  Holm, SR (2003, November 20). Modelling and optimization of a permanent magnet machine in a flywheel. Delft University of Technology (249 pag.) (Delft: S.R. Holm). Prom./coprom.: Prof.dr. JA Ferreira & Dr.ir. H Polinder.

article - letter to the editor
  Baalbergen, JF, Bauer, P & Ferreira, JA (2009). Energy storage and power management for typical 4Q-load. Ieee transactions on industrial electronics, 56(5), 1485-1498.

  Bauer, P & Duijsen, PJ van (2009). Sensorless control for electrical and hybrid electric vehicles. Bodo's power systems, 11, 50-52.

  Bauer, P & Duijsen, PJ van (2009). Simulating losses and semiconductor junction temperature in power electronics. Bodo's power systems, 9, 36-38.

  Borisavljevic, A, Polinder, H & Ferreira, JA (2009). On the speed limits of permanent magnet machines. Ieee transactions on industrial electronics.

  Harman, C, Sivapalan, M & Kumar, P (2009). Power law catchment-scale recessions arising from heterogeneous linear small-scale dynamics. Water resources research, 45, 1-13.

  Janse van Rensburg, PA, Wyk, JD van & Ferreira, JA (2009). Design, prototyping and assessment of a 3 kW integrated LCT component for development in various resonant converters. IET power electronics, 2(5), 535-544.

  Krc, J , Zeman, M, Luxembourg, SL & Topic, M (2009). Modulated photonic-crystal structures as broadband back reflectors in thin-film solar cells. Applied physics letters, 94(15), 153501-153501-3.

  Kumar, P & Bauer, P (2009). Progressive design methodology for complex engineering systems based on multiobjective genetic algorithms and linguistic decision making. Soft computing, 13(7), 649-679.

  Leuchter, J, Bauer, P, �e�ucha, V & H�jek, V (2009). Dynamic behavior modeling and verification of advanced electrical-generator set concept. Ieee transactions on industrial electronics, 56(1), 266-279.

  Li, H, Chen, Z & Polinder, H (2009). Optimization of multigrid permanent-magnet wind generator systems. Ieee transactions on energy conversion, 24(1), 82-92.

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2009). High-performance thermal management for high-power high-frequency transformers. Epe journal, 19(2), 20-27.

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2009). Reaching high power density in multikilowatt DC-DC converters with galvanic isolation. Ieee transactions on power electronics, 24(3), 603-612.

  Roodenburg, B, Malchev, PG, Haan, SWH de, Valadas Leitao, TI & Ferreira, JA (2009). Conductive carbon loaded polymer film electrodes for pulsed power applications. Part II: determination and minimization of the contact resistance. International journal of polymer analysis and characterization, 14(1), 1-18.

  Roodenburg, B, Malchev, PG, Haan, SWH de, Valadas Leitao, TI & Ferreira, JA (2008). Conductive carbon loaded polymer film electrodes for pulsed-power applications. Part I: Determination of the film properties. International journal of polymer analysis and characterization, 13(6), 395-412.

  Zhao, D, Ferreira, JA, Roc'h, A & Leferink, F (2009). Common-mode DC-bus filter design for variable-speed drive system via transfer ratio measurements. Ieee transactions on power electronics, 24(2), 518-524.

  Zhou, Y , Bauer, P, Ferreira, JA & Pierik, J (2009). Integration of large offshore wind farm - DFIG with classical HVDC. Acta electrotechnica et informatica, 9, 8-14.

  Zhou, Y , Bauer, P, Ferreira, JA & Pierik, J (2009). Operation of grid-connected DFIG under unbalanced grid voltage condition. Ieee transactions on energy conversion, 24(1), 240-246.

  Bang, DJ, Polinder, H, Shrestha, G & Ferreira, JA (2008). Promising direct-drive generator systems for large wind turbines. Epe journal, 13(3), 7-13.

  Bauer, P & Duijsen, PJ van (2008). Power electronics simulations. International review on computers and software (IRECOS), 3(3), 307-314.

  Dudrik, J & Bauer, P (2008). New methods in teaching of power electronics converters and devices. International journal of engineering education, 24(5), 1040-1048.

  Jong, ECW de, Ferreira, JA & Bauer, P (2008). Toward the next level of PCB usage in power electronic converters. Ieee transactions on power electronics, 23(6), 3151-3163.

  Kumar, P & Bauer, P (2008). Improved analytical model of a permanent-magnet brushless DC motor. Ieee transactions on magnetics, 44(10), 2299-2309.

  McDonald, AS, Mueller, MA & Polinder, H (2008). Structural mass in direct-drive permanent magnet electrical generators. IET renewable power generation, 2, 3-15.

  Roodenburg, B, Malchev, PG, Haan, SWH de, Leit�o, TIV & Ferreira, JA (2008). Conductive carbon loaded polymer film electrodes for pulsed-power applications. Part I: Determination of the film properties. International journal of polymer analysis and characterization, 13(6), 395-412.

  Roodenburg, B & Evenblij, B (2008). Design of a fast linear drive for (hybrid) circuit breakers - Development and validation of a multi domain simulation environment. Mechatronics, 18, 159-171.

  Bauer, P & Sit�r, J (2007). Analysis of electromechanical actuator based on FEM-circuit simulator coupling. Communications, 9(1), 8-16.

  Bauer, P, Dudak, J , Maga, D & Hajek, V (2007). Distance practical education for power electronics. International journal of engineering education, 23(6), 1210-1218.

  Bauer, P, Spanjaard, S, Ferreira, JA & Hollander, M (2007). Efficient gradient coil driver for MRI. International review of electrical engineering, 2(2), 217-223.

  Encica, L, Echeverria, D, Lomonova, EA, Vandenput, AJA & Hemker, P.W. (2007). Efficient Optimal Design of Electromagnetic Actuators using Space-Mapping. Structural and multidisciplinary optimization, 33(6), 481-491.

  Fed�k, V & Bauer, P (2007). Methods in teaching industrial mechatronic systems. Communications, 9(1), 47-51.

  Ferreira, JA, Dorland, P & Beer, FG de (2007). An active inline notch filter for reducing acoustic noise in drives. Ieee transactions on industry applications, 43(3), 798-804.

  Holm, SR, Polinder, H & Ferreira, JA (2007). Analytical modeling of a permanent-magnet synchronous machine in a flywheel. Ieee transactions on magnetics, 43(5), 1955-1967.

  Korondi, P, Bauer, P & Duijsen, PJ van (2007). Efficient integrated control for chattering phenomena of a motion control system in sliding mode. International review of electrical engineering, 2(1), 71-79.

  Kumar, P , Gospodaric, D & Bauer, P (2007). Improved genetic algorithm inspired by biological evolution. Soft computing, 11(10), 923-941.

  Leuchter, J & Bauer, P (2007). Efficiency investigation of electrical generator-converter set. Transactions on Industry Applications of the IEE, 127(10), 1064-1069.

  Morren, J & Haan, SWH de (2007). Short-circuit current of wind turbines with doubly fed induction generator. Ieee transactions on energy conversion, 22(1), 174-180.

  Polinder, H & Compter, JC (2007). Populair dankzij prijs en prestatie. Mikroniek, 47(1), 26-31.

  Roodenburg, B, Taffone, A, Gilardi, E, Tenconi, SM, Evenblij, BH & Kaanders, MAM (2007). Combined ZVS-ZCS topology for high-current direct current hybrid switches: design aspects and first measurements. Iee proceedings-electric power applications, 1(2), 183-192.

  Zhou, K, Ferreira, JA & Haan, SWH de (2007). Optimal energy management strategy and system sizing method for stand-alone photovoltaic-hydrogen systems. International journal of hydrogen energy, 1-13.

  Bauer, P & Nagy, I (2006). E-learning for power quality. Transactions on Industry Applications of the IEE, 126(5), 547-552.

  Bauer, P & Leuchter, J (2006). Modern education of power electronics by simulation and animation. WSEAS transactions on advances in engineering education, 3(3), 204-208.

  Damen, M, Bauer, P, Haan, SWH de & Pierik, JTG (2006). Steady state electrical design, power performance and economic modeling of offshore wind farms. Epe journal, 16(4), 1-6.

  Dudrik, J & Bauer, P (2006). DC source for arc welding with soft-switching current-mode controlled DC-DC converter. International review of electrical engineering, 1(1), 162-169.

  Fed�k, V & Bauer, P (2006). E-learning concept for electrical engineering. International review of electrical engineering, 1(4), 575-581.

  Goden de Sousa Prado, M, Gardner, F, Damen, M & Polinder, H (2006). Modelling and test results of the Archimedes wave swing. Proceedings of the institution of mechanical engineers part a-journal of power and energy, 220(8), 855-868.

  Hoeijmakers, MJ & Ferreira, JA (2006). The electric variable transmission. Ieee transactions on industry applications, 42(4), 1092-1100.

  Jong, ECW de, Ferreira, JA & Bauer, P (2006). Design techniques for thermal management in switch mode converters. Ieee transactions on industry applications, 42(6), 1375-1386.

  Lebedev, AV, Lomonova, EA, Laro, DAH & Put, A van der (2006). Optimal Design Strategy for a Novel Linear Electromechanical Actuator. Electrical engineering in japan, 126(10), 1-6.

  Leuchter, J, Kurka, O & Bauer, P (2006). Mobile electrical generator sets - Variable speed and power electronic converter. Power systems design Europe, Jan/Feb, 40-44.

  Leuchter, J, Kurka, O, Bauer, P & Rerucha, V (2006). Modelling and experimental verification of mobile power sources with variable speed. Journal of electrical engineering-elektrotechnicky casopis, 57(5), 241-248.

  Morren, J, Haan, SWH de & Ferreira, JA (2006). Contribution of DG units to primary frequency control. European transactions on electrical power, 16(5), 507-521.

  Morren, J, Pierik, J & Haan, SWH de (2006). Inertial response of variable speed wind turbines. Electric power systems research, 76(11), 980-987.

  Morren, J, Haan, SWH de, Kling, WL & Ferreira, JA (2006). Wind turbines emulating inertia and supporting primary frequency control. Ieee transactions on power systems, 21(1), 433-434.

  Polinder, H, Haan, SWH de, Dubois, M & Slootweg, JG (2005). Basic operation principles and electrical conversion systems of wind turbines. Epe journal, 15(4), 43-50.

  Polinder, H, Pijl, FFA van der, Vilder, GJ de & Tavner, P.J. (2006). Comparison of direct-drive and geared generator concepts for wind turbines. Ieee transactions on energy conversion, 21(3), 725-733.

  Ye, Y, Zhou, K , Wang, D & Wang, JC (2006). High performance repetitive control of PWM DC-AC converters with real-time phase-lead FIR filter. Ieee transactions on circuits and systems ii-analog and digital signal processing, 53(8), 768-772.

  Zhou, K , Low, KS, Wang, D, Luo, FL, Zhang, B & Wang, Y. (2006). Zero-phase odd-harmonic repetitive controller for a single-phase PWM inverter. Ieee transactions on power electronics, 21(1), 193-201.

  Bauer, P, Duijsen, PJ van & Fedak, V (2005). Advances and trends in simulation of power electronics and electrical drives. AT&P Journal, 5-6(5), 50-52,100,101.

  Bauer, P & Rompelman, O (2005). Learning platform for study of power electronic application in power systems. European journal of engineering education, 30(2), 275-285.

  Blaabjerg, F, Consoli, A, Ferreira, JA & Wyk, JD van (2005). The future of electronic power processing and conversion. Ieee transactions on power electronics, 20(3), 715-720.

  Blaabjerg, F, Consoli, A, Ferreira, JA & Wyk, JD van (2005). The future of electronic power processing and conversion. Ieee transactions on industry applications, 41(1), 3-8.

  El-Husseini, MH, Spronck, JW, Polinder, H, Langen, HH, Compter, JC & Eijk, J van (2005). Low-stiffness motor: review of different brushless, ironless motor topologies for use in precision engineering applications. Electromotion journal, 12(2-3), 166-172.

  Enslin, JHR, Bauer, P, Groeman, F & Knijp, J (2005). Status and operational experience with FACTS devices in high voltage networks. Revue E tijdschrift, 121(3), 1-10.

  Gerber, M, Ferreira, JA, Hofsajer, IW & Seliger, N (2005). High density packaging of the passive components in an automotive DC/DC converter. Ieee transactions on power electronics, 20(2), 268-275.

  Gerber, M, Ferreira, JA, Seliger, N & Hofsajer, IW (2005). Integral 3-D thermal, electrical and mechanical design of an automotive DC/DC converter. Ieee transactions on power electronics, 20(3), 566-575.

  Holm, SR, Polinder, H & Ferreira, JA (2005). Optimization of a flywheel PMSM with an external rotor and a slotless stator. KIEE International transactions on electrical machinery and energy conversion systems, 5-B(3), 215-223.

  Jong, ECW de, Ferreira, JA & Bauer, P (2005). Thermal design based on surface temperature mapping. IEEE power electronics letters, 1-5.

  Leuchter, J, Bauer, P, Kurka, O & Stekly, V (2005). Computer analyses and efficiency investigation for variable speed concept of mobile electrical generating sets. WSEAS transactions on systems, 8(4), 1278-1286.

  Morren, J, Pierik, JTG, Haan, SWH de & Bozelie, J (2005). Grid interaction of offshore wind farms. Part 1. Models for dynamic simulation. Wind energy, 8(3), 265-278.

  Morren, J, Pierik, JTG, Haan, SWH de & Bozelie, J (2005). Grid interaction of offshore wind farms. Part 2. Case study simulations. Wind energy, 8(3), 279-293.

  Morren, J & Haan, SWH de (2005). Ridethrough of wind turbines with doubly-fed induction generator during a voltage dip. Ieee transactions on energy conversion, 20(2), 435-441.

  Polinder, H, Mecrow, BC, Jack, AG, Dickinson, PG & Mueller, MA (2005). Conventional and TFPM linear generators for direct-drive wave energy conversion. Ieee transactions on energy conversion, 20(2), 260-267.

  Polinder, H, Damen, MEC & Gardner, F (2005). Design, modelling and test results of the AWS PM linear generator. European transactions on electrical power, 15(3), 245-256.

  Popovic, J & Ferreira, JA (2005). An approach to deal with packaging in power electronics. Ieee transactions on power electronics, 20(3), 550-557.

  Popovic, J & Ferreira, JA (2005). Converter concepts to increase the integration level. Ieee transactions on power electronics, 20(3), 558-565.

  Popovic, J, Jong, ECW de & Ferreira, JA (2005). What is the best way to construct a power electronic converter? IEEE Power Electronics Society Newsletter, 17(3), 10-14.

  Roodenburg, B, Morren, J, Berg, HE & Haan, SWH de (2005). Metal release in a stainless steel Pulsed Electric Field (PEF) system. Part I. Effect of different pulse shapes; theory and experimental method. Innovative food science & emerging technologies, 6(3), 327-336.

  Roodenburg, B, Morren, J, Berg, HE & Haan, SWH de (2005). Metal release in a stainless steel pulsed electric field (PEF) system. Part II. The treatment of orange juice; related to legislation and treatment chamber lifetime. Innovative food science & emerging technologies, 6(3), 337-345.

  Waffenschmidt, E, Ackermann, B & Ferreira, JA (2005). Design method and material technologies for passives in printed circuit board embedded circuits. Ieee transactions on power electronics, 20, 576-584.

  Bauer, P & Gospodaric, D (2004). Hybrid electric car design and simulation. Optimize at the component level. Power systems design Europe, 26-28.

  Bauer, P, Enslin, JHR & Jansen, CPJ (2004). In store for the future? Interconnection and energy storage for offshore wind farms. Renewable energy world, 7(1), 104-113.

  Bauer, P & Duijsen, PJ van (2004). Simulation software with open system interface. Power electronics Europe, 29-31.

  Ferreira, JA, Kane, IJ, Klinkert, P & Hage, TB (2004). Square-wave current inverter for aircraft-mounted electromagnetic surveying systems. Ieee transactions on industry applications, 40(1), 213-219.

  Gerber, M, Ferreira, JA, Hofsajer, IW & Seliger, N (2004). A high-density heat-sink-mounted inductor for automative applications. Ieee transactions on industry applications, 40(4), 1031-1038.

  Hofsajer, IW, Gerber, MB, Ferreira, JA & Seliger, N (2004). A new integrated packaging technology for high-power automative electronics. South african journal of science, 100(5/6), 273-278.

  Morren, J, Roodenburg, B & Haan, SWH de (2003). Electrochemical reactions and electrode corrosion in pulsed electric field (REF) treatment chambers. Innovative food science & emerging technologies, 4, 285-295.

  Polinder, H (2004). Immense generator voor Archimedes Wave Swing. Energietechniek, 82(9), 36-39.

  Polinder, H, Damen, MEC & Gardner, F (2004). Linear PM generator system for wve energy conversion in the AWS. Ieee transactions on energy conversion, 19(3), 583-589.

  Popovic, J, Ferreira, JA, Cornelissen, R & Waffenschmidt, E (2004). Modular technology concepts for converters. Power systems design Europe, 32-36.

  Spronck, JW, El-Husseini, MH, Jabben, L, Overschie, PM, Hobbelen, D.G.E., Pau, P du, Polinder, H & Eijk, J van (2004). Mastering high-density optical disks: a new concept design. Assembly automation, 24(4), 406-415.

  Vons, V, Schmidt-Ott, A & Creyghton, YLM (2004). Production of Nanoparticles in a Cold Discharge Plasma at Atmospheric Pressure. Journal of aerosol science, 31-32.

  Bauer, P & Kolar, JW (2003). Teaching power electronics in the 21st century. Epe journal, 13(4), 1-8.

  Dubois, M, Polinder, H & Ferreira, JA (2003). Contribution of permanent-magnet volume elements to no-load voltage in machines. Ieee transactions on magnetics, 39(3), 1784-1792.

  Dubois, M, Polinder, H & Ferreira, JA (2003). Varying magnetization orientation for permanent-magnet volume reduction in machines. Ieee transactions on magnetics, 39(3), 1793-1799.

  El-Husseini, MH, Venet, P, Al-majid, A, Fathallah, M & Ferreira, JA (2003). Manufacturing technology effect on current pulse handling performance of metallized polypropylene film capacitors. Journal of physics d-applied physics, 36, 1-9.

  Ferreira, JA & Waffenschmidt, E (2003). Low profile switchmode converters with embedded passive components in the PCB. Epe journal, 13(2), 11-19.

  Owsianyk, D & Bauer, P (2003). Computer aided design of a flyback converter. Power electronics Europe, 29-31.

  Polinder, H, Slootweg, JG, Hoeijmakers, MJ & Compter, JC (2003). Modeling of a linear PM machine including magnetic saturation and end effects: maximum force-to-current ration. Ieee transactions on industry applications, 39(6), 1681-1688.

  Slootweg, JG, Haan, SWH de, Polinder, H & Kling, WL (2003). General model for representing variable speed wind turbines in power systems dynamics simulations. Ieee transactions on power systems, 18(1), 144-151.

  Slootweg, JG, Polinder, H & Kling, WL (2003). Representing wind turbine electrical generating systems in fundamental frequency simulations. Ieee transactions on energy conversion, 18(4), 516-524.

  Slootweg, JG, Polinder, H, Kling, WL & Vries, E de (2003). Technologie van windturbines: constant versus variabel toerental. Energietechniek, 36-41.

  Bauer, P & Rompelman, O (2002). The -energy challenge- in electrical engineering education. European journal of engineering education, 27(4), 1-9.

  Dijk, E van, Ferreira, JA & Gelder, P van (2002). Current sharing between diode clamps of polar capacitor bank. Ieee transactions on industry applications, 38(6), 1600-1605.

  Dubois, M, Polinder, H & Ferreira, JA (2002). Magnet shaping for minimal magnet volume in machines. Ieee transactions on magnetics, 38(5), 2985-2987.

  Ferreira, JA (2002). High power densities with three dimensional integration. Epe journal, 12(4), 7-13.

  Gerber, MB, Ferreira, JA, Hofsajer, IW & Seliger, N (2002). A volumetric optimization of a Low-Pass filter. Ieee transactions on industry applications, 38(5), 1432-1440.

  Haan, SWH de & Willcock, PR (2002). Comparison of the energy performance of pulse generation circuits for PEF. Innovative food science & emerging technologies, 3(4), 349-356.

  Imre, TG, Cronje, WA, Wyk, JD van & Ferreira, JA (2002). Loss modeling and thermal measurement in planar inductors - A case study. Ieee transactions on industry applications, 38(6), 1613-1621.

  Molenaar, DP, Bosgra, OH & Hoeijmakers, MJ (2002). Time-domain identification of synchronous generator transfer functions. Journal of solar energy engineering-transactions of the asme, 124, 419-426.

  Slootweg, JG, Haan, SWH de, Polinder, H & Kling, WL (2001). Voltage control methods with grid connected wind turbines: a tutorial review. Wind engineering, 25(6), 353-365.

  Strydom, JT, Wyk, JD van, Campbell, CK, Ferreira, JA & Holm, MFK (2002). Packaging of an integrated planar power passive module for a power electronics converter: a 1 MHz case study. Ieee transactions on components and packaging technologies, 25(2), 260-265.

article in volume - proceedings
  Agbo, SN, Krc, J , Swaaij, RACMM van & Zeman, M (2009). Sensitivity analysis of model parameters of �c-Si:H solar cells on textured glass/ZnO:Al substrate. In s.n. (Ed.), Proceedings SAFE ProRISC 2009 (pp. 133-138). Utrecht: Technology Foundation.

  Ani, SO, Polinder, H, Ferreira, JA & Ockels, WJ (2009). Design challenges and potentials of HTS synchronous motor for Superbus. In s.n. (Ed.), Proceedings IEEE International Electric Machines and Drives Conference, 2009. IEMDC '09 (pp. 399-404). Piscataway: IEEE.

  Bang, DJ, Chang, J, Kim, J & Kang, D (2009). A novel transverse flux machine for direct drive applications. In N Ida (Ed.), Proceedings of the 2009 conference on the compuation of electromagnetic fields, COMPUMAG 2009 (pp. 1-4). s.l.: Compumag 2009/IEEE.

  Bang, DJ, Polinder, H, Shrestha, G & Ferreira, JA (2009). Possible solutions to overcome drawbacks of direct-drive generator for large wind turbines. In s.n. (Ed.), Proceedings European wind energy conference & exhibition, EWEC 2009 (pp. 1-10). Brussel: EWEA.

  Bang, DJ, Polinder, H, Shrestha, G & Ferreira, JA (2009). Ring-shaped transverse flux PM generator for large direct-drive wind turbines. In s.n. (Ed.), Proceedings 2009 International conference on power electronics and drive systems (pp. 1-6). Piscataway: IEEE.

  Bauer, P, Kulcsar, BA & Bokor, J (2009). Discrete time minimax tracking control with disturbance estimation. In SN (Ed.), Proceedings of the European control conference 2009 (pp. 2658-2663). Budapest, Hungary: ECC.

  Bauer, P, Kulcsar, BA & Bokor, J (2009). Discrete time minimax tracking control with state and disturbance estimation II: time-varying reference and disturbance signals. In s.n. (Ed.), Proceedings of the 17th Mediterranean conference on control & automation (pp. 486-491). Thessaloniki, Greece: MCCA.

  Bauer, P, Wolbank, TM, Macheiner, P & Vogelsberger, M (2009). Distance laboratory for teaching industrial electronics - II. In s.n. (Ed.), Proceedings of the 3rd IEEE International Conference on e-Learning in Industrial Electronics (pp. 1-6). Piscataway: IEEE.

  Bauer, P (2008). Distance laboratory for teaching three phase AC converters. In s.n. (Ed.), Proceedings International conference on low voltage electrical machines (pp. 1-4). Brno: Department of Power Electrical and Electronic Engineering, FEEC BUT.

  Bauer, P, Lascu, D, Lascu, M, Babaita, M, Popescu, V, Negoitescu, D & Popovici, A (2009). E-learning practical teaching of uncontrolled rectifiers. In s.n. (Ed.), Proceedings 13th European conference on Power Electronics and Applications, 2009. EPE '09 (pp. 1-10). IEEE.

  Bauer, P, Doppler, JP & Stembridge, NG (2009). Electric vehicle and charging technology. In s.n. (Ed.), Proceeding International conference on low voltage electrical machines (pp. 1-4). Brno: Department of Power Electrical and Electronic Engineering, FEEC BUT.

  Bauer, P, Linhart, L & Lettl, J (2009). Matrix converter two step commutation method development. In s.n. (Ed.), Proceedings 15th International Conference on Electrical Drives and Power Electronics EDPE 2009 (pp. 1-6). Dubrovnik: KoREMA Croatian Society for Communications, Computing, Electronics, Measurement and Control.

  Bauer, P, Leuchter, J & Finney, SJ (2009). Modeling and experimental verification of EGS to achieve higher efficiency. In s.n. (Ed.), Proceedings of the 35th annual conference of the IEEE Industrial Electronics Society (pp. 1-6). Piscataway: IEEE.

  Bauer, P & Kumar, P (2009). Optimization technique for low voltage electrical machines. In s.n. (Ed.), Proceeding International conference on low voltage electrical machines (pp. 1-4). Brno: Department of Power Electrical and Electronic Engineering, FEEC BUT.

  Bauer, P (2009). Survey of Elearning methods for mechatronics. In s.n. (Ed.), Proceedings 12th International conference on mechatronics mechatronika (pp. 187-192). Trencin: AD University of Trencin, Faculty of Mechatronics.

  Bauer, P & Fedak, V (2009). Teaching electrical drives and power electronics (ED&PE): eLearning and beyond. In s.n. (Ed.), Proceedings 15th International Conference on Electrical Drives and Power Electronics EDPE 2009 (pp. 1-8). Dubrovnik: KoREMA Croatian Society for Communications, Computing, Electronics, Measurement and Control.

  Bauer, P, Staudt, V, Steimel, A & Menzner, S (2009). Web-based experiment introducing power quality and active filters. In s.n. (Ed.), Proceedings International Conference on Power Engineering, Energy and Electrical Drives, 2009. POWERENG '09 (pp. 649-654). s.l.: IEEE/Uninova.

  Borisavljevic, A, Kimman, MH , Tsigkourakos, P, Langen, HH, Polinder, H & Ferreira, JA (2009). Integration of a motor drive within active magnetic bearings for high-speed micro-milling. In s.n. (Ed.), Proceedings 9th International conference of the European Society for Precision Engineering & Nanotechnology (pp. 1-4). San Sebastian: euspen.

  Borisavljevic, A, Kimman, MH , Tsigkourakos, P, Polinder, H, Langen, HH, Munnig Schmidt, RH & Ferreira, JA (2009). Motor drive for a novel high-speed micro-milling spindle. In s.n. (Ed.), Proceedings IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2009. AIM 2009 (pp. 1492-1497). Piscataway: IEEE.

  Cvoric, D, Lahaye, DJP, Haan, SWH de & Ferreira, JA (2009). 3D Transient field-circuit modeling of inductive fault current limiters. In Proceedings of the 17th international conference on the computation of electromagnetics fields (pp. 167-168). Florianopolis: Compumag 2009.

  Cvoric, D, Haan, SWH de & Ferreira, JA (2009). New saturable-core Fault Current Limiter topology with reduced core size. In s.n. (Ed.), Proceedings IEEE 6th International Power Electronics and Motion Control Conference, 2009. IPEMC '09 (pp. 920-926). Piscataway: IEEE.

  Czech, B, Bauer, P, Polinder, H, Zhou, Y & Korondi, P (2009). Comparing the electrical transmission systems for Archimedes Wave Swing parks. In s.n. (Ed.), Proceedings of the 8th European Wave and Tidal Energy Conference (EWTEC 2009) (pp. 1-6). Uppsala: Uppsala Universitet.

  Czech, B, Bauer, P, Polinder, H & Korondi, P (2009). Modeling and simulating an Archimedes Wave Swing park in steady state conditions. In s.n. (Ed.), Proceedings 13th European conference on Power Electronics and Applications, 2009. EPE '09 (pp. 1-10). Piscataway: IEEE.

  Erven, AJM van, Rutten, J, Hofstad, G van der, Groot, H de, Peeters, P, Ruijter, J de, Borg, H, Solntsev, S, Isabella, O, Zeman, M, Rajeswaran, G & Arya, R (2009). Periodic texturing of thin film silicon solar cell superstrates. In s.n. (Ed.), Proceedings 24th European photovoltaic solar energy conference and exhibition (pp. 2668-2671). Hamburg: WIP-Renewable Energies.

  Fischer, M & Zeman, M (2009). Nanostructured silicon films. In s.n. (Ed.), Proceedings SAFE ProRISC 2009 (pp. 75-80). Utrecht: Technology Foundation.

  Gutierrez Alcaraz, JM, Haan, SWH de, Bauer, P & Ferreira, JA (2009). A new methodology for system integration. In s.n. (Ed.), Proceedings IEEE 6th International Power Electronics and Motion Control Conference, 2009. IPEMC '09 (pp. 1254-1258). Piscataway: IEEE.

  Gutierrez Alcaraz, JM, Al-Fartusi, N, Polinder, H & Ferreira, JA (2009). Rapid modelling and design of Variable Speed Permanent Magnet Generators for maritime applications. In s.n. (Ed.), Proceedings 13th European conference on Power Electronics and Applications, 2009. EPE '09 (pp. 1-10). IEEE.

  Haizoune, F, Bergveld, HJ, Popovi�-Gerber, J & Ferreira, JA (2009). Topology comparison and design optimisation of the buck converter and the single-inductor dual-output converter for system-in-package in 65nm CMOS. In s.n. (Ed.), Proceedings IEEE 6th International Power Electronics and Motion Control Conference, 2009. IPEMC '09 (pp. 295-301). Piscataway: IEEE.

  Isabella, O, Krc, J & Zeman, M (2009). Application of photonic crystals as back reflectors in thin-film silicon solar cells. In s.n. (Ed.), Proceedings 24th European photovoltaic solar energy conference and exhibition (pp. 2304-2309). Hamburg: WIP-Renewable Energies.

  Isabella, O, Lipovsek, B, Krc, J & Zeman, M (2009). Photonic crystal back reflector in thin-film silicon solar cells. In A Flewitt, Q Wang, J Hou, S Uchikoga & A Nathan (Eds.), Amorphous and polycrystalline thin-film science and technology 2009 Vol. 1153. Materials Research Society symposium proceedings (pp. 1-6). Warrendale: Materials Research Society.

  Jassal, AK, Polinder, H, Shrestha, G & Versteegh, C (2009). Closed slot topology for reduction of cogging and noise in permanent magnet direct drive generator for wind turbines. In s.n. (Ed.), Proceedings European wind energy conference & exhibition, EWEC 2009 (pp. 1-5). Brussel: EWEA.

  Jassal, AK, Polinder, H & Lahaye, DJP (2009). Comparison of analytical and finite element calculation of eddy-current losses in the solid back-iron of pm machines with concentrated fractional pitch windings. In Proceedings of the 17th international conference on the computation of electromagnetics fields (pp. 199-200). Florianopolis: Compumag 2009.

  Josifovic, I, Popovi�-Gerber, J & Ferreira, JA (2009). A PCB system integration concept for power electronics. In s.n. (Ed.), Proceedings IEEE 6th International Power Electronics and Motion Control Conference, 2009. IPEMC '09 (pp. 756-762). Piscataway: IEEE.

  Josifovic, I, Popovi�-Gerber, J & Ferreira, JA (2009). New power electronics components concept for automated manufacturing. In s.n. (Ed.), Proceedings 13th European conference on Power Electronics and Applications, 2009. EPE '09 (pp. 1-10). IEEE.

  Josifovic, I, Popovi�-Gerber, J & Ferreira, JA (2009). Thermally enhanced SMT power components. In s.n. (Ed.), Proceedings IEEE Energy conversion congress and exposition, ECCE 2009 (pp. 1017-1024). Piscataway: IEEE.

  Morren, J & Haan, SWH de (2008). Impact of distributed generation units with power electronic converters on distribution network protection. In s.n. (Ed.), Proceedings International conference on developments in power system protection (DPSP 2008) (pp. 664-669). Stevenage, UK: IET Services Ltd..

  Morren, J & Haan, SWH de (2009). Maximum penetration level of distributed generation without violating voltage limits. In s.n. (Ed.), Proceedings 20th International conference and exhibition on electricity distribution, CIRED 2009 (pp. 1-4). Stevenage: IET Services Ltd..

  Najjar, R, Quesnel, E, Baclet, N, Muffato, V, Boutami, S, Labeye, P, Cayron, C, Kean, A, Zeman, M, Santbergen, R, Topic, M, Meyer, T & Conibeer, G (2009). Improvement of energy conversion efficiency of amorphous silicon thin-film solar cells through plasmon effect. In M Topic, J Krc & I Sorli (Eds.), The Proceedings of the MIDEM 2009 Conference (pp. 281-286). Ljubljana: MIDEM.

  Pijl, FFA van der, Castilla, M & Bauer, P (2009). Implementation of an adaptive sliding-mode control for a quantum series-resonant converter. In s.n. (Ed.), Proceedings 13th European conference on Power Electronics and Applications, 2009. EPE '09 (pp. 1-10). IEEE.

  Polinder, H, Lendenmann, H, Chin, R & Arshad, WM (2009). Fault tolerant generator systems for increasing availability of wind turbines. In s.n. (Ed.), Proceedings European wind energy conference & exhibition, EWEC 2009 (pp. 1-6). Brussel: The European Wind Energy Association.

  Polinder, H, Lendenmann, H, Chin, R & Arshad, WM (2009). Fault tolerant generator systems for wind turbines. In s.n. (Ed.), Proceedings IEEE International Electric Machines and Drives Conference, 2009. IEMDC '09 (pp. 675-681). Piscataway: IEEE.

  Roodenburg, B, Haan, SWH de & Ferreira, JA (2009). Utilisation of conductive plastic packaging film for pulsed electric field (PEF) treatment. In E Vorobiev, N Lebovka, E van Hecke & J-L Lanoiselle (Eds.), BEF 2009, Proceedings of the International conference on bio and food electrotechnologies (pp. 26-32). Compiegne: Universite de Technologie de Compiegne.

  Shrestha, G, Polinder, H, Bang, DJ, Jassal, AK & Ferreira, JA (2009). Investigation on the possible use of magnetic bearings in large direct drive wind turbines. In s.n. (Ed.), Scientific proceedings European wind energy conference & exhibition, EWEC 2009 (pp. 136-139). Brussel: EWEA.

  Shrestha, G, Polinder, H & Ferreira, JA (2009). Scaling laws for direct drive generators in wind turbines. In s.n. (Ed.), Proceedings IEEE International Electric Machines and Drives Conference, 2009. IEMDC '09 (pp. 797-803). Piscataway: IEEE.

  Steimel, A, Staudt, V, Bauer, P & Menzner, S (2009). On-line Active filter experiment combining theory, simulation and measurement. In s.n. (Ed.), Proceedings 13th European conference on Power Electronics and Applications, 2009. EPE '09 (pp. 1-10). IEEE.

  Vet, B, Grancic, B, Isabella, O, Solntsev, S & Zeman, M (2009). Optical and electrical simulations of advanced silicon based solar cell devices. In s.n. (Ed.), Proceedings 24th European photovoltaic solar energy conference and exhibition (pp. 2682-2688). Hamburg: WIP-Renewable Energies.

  Visscher, K & Haan, SWH de (2009). Virtual synchronous machines (VSG's) for frequency stabilisation in future grids. In s.n. (Ed.), Proceedings 20th International conference and exhibition on electricity distribution, CIRED 2009 (pp. 1-4). Stevenage: IET Services Ltd..

  Wang, Y, Haan, SWH de & Ferreira, JA (2009). Optimal operating ranges of three modulation methods in dual active bridge converters. In s.n. (Ed.), Proceedings IEEE 6th International Power Electronics and Motion Control Conference, 2009. IPEMC '09 (pp. 1397-1401). Piscataway: IEEE.

  Wang, Y, Haan, SWH de & Ferreira, JA (2009). Potential of improving PWM converter power density with advanced components. In s.n. (Ed.), Proceedings 13th European conference on Power Electronics and Applications, 2009. EPE '09 (pp. 1-10). IEEE.

  Wang, Y, Haan, SWH de & Ferreira, JA (2009). Thermal design guideline of PCB traces under DC and AC current. In s.n. (Ed.), Proceedings IEEE Energy conversion congress and exposition, ECCE (pp. 1240-1246). Piscataway: IEEE.

  Wesenbeeck, MPN van, Haan, SWH de, Varela, P & Visscher, K (2009). Grid tied converter with virtual kinetic storage. In s.n. (Ed.), Proceedings 2009 IEEE Bucharest Power Tech Conference (pp. 1-7). Piscataway: IEEE.

  Wolmarans, JJ, Polinder, H, Ferreira, JA & Clarenbach, D (2009). A novel modulation technique for fault tolerant, permanent magnet drives. In s.n. (Ed.), Proceedings 13th European conference on Power Electronics and Applications, 2009. EPE '09 (pp. 1-10). IEEE.

  Wolmarans, JJ, Popovi�-Gerber, J & Ferreira, JA (2009). New power electronics components concept for automated manufacturing. In s.n. (Ed.), Proceedings 13th European conference on Power Electronics and Applications, 2009. EPE '09 (pp. 1-10). IEEE.

  Wolmarans, JJ, Polinder, H, Ferreira, JA & Clarenbach, D (2009). Selecting an optimum number of system phases for an integrated, fault tolerant permanent magnet machine and drive. In s.n. (Ed.), Proceedings 13th European conference on Power Electronics and Applications, 2009. EPE '09 (pp. 1-10). IEEE.

  Yuan, Z, Haan, SWH de & Ferreira, JA (2009). A method to synchronize single-phase floating with grid without high voltage measurement or high bandwidth communications. In s.n. (Ed.), Proceedings 2009 IEEE Bucharest Power Tech Conference (pp. 1-6). Piscataway: IEEE.

  Yuan, Z, Haan, SWH de & Ferreira, JA (2009). Construction and first result of a scaled transmission system with the distributed power flow controller (DPFC). In s.n. (Ed.), Proceedings 13th European conference on Power Electronics and Applications, 2009. EPE '09 (pp. 1-10). Piscataway: IEEE.

  Yuan, Z, Haan, SWH de & Ferreira, JA (2009). DPFC control during shunt converter failure. In s.n. (Ed.), Proceedings IEEE Energy conversion congress and exposition, ECCE (pp. 2727-2732). Piscataway: IEEE.

  Yuan, Z, Haan, SWH de & Ferreira, JA (2009). Utilizing distributed power flow controller (DPFC) for power oscillation damping. In s.n. (Ed.), Proceedings Power & Energy Society General Meeting, 2009. PES '09. IEEE (pp. 1-5). Piscataway: IEEE.

  Zhang, W, Abate, A, Vitus, MP & Hu, J (2009). On piecewise quadratic control-lyapunov funcions for switched linear systems. In Baillieul,J & Guo,L (Eds.), Proceedings of the combined 48th IEEE conference on decision and control and 28th Chinese control conference (pp. 1088-1093). Shanghai, China: IEEE.

  Zhou, Y , Kumar, P , Bauer, P & Ferreira, JA (2009). Optimization of a hybrid wind park through a design approach - Progressive design methodology. In s.n. (Ed.), Proceedings IEEE 6th International Power Electronics and Motion Control Conference, 2009. IPEMC '09 (pp. 1092-1098). Piscataway: IEEE.

  Baalbergen, JF & Bauer, P (2008). Cost evaluation of generator-set with energy storage for 4Q-load. In s.n. (Ed.), Power Electronics and motion control conference, EPE-PEMC 2008 (pp. 2170-2177). Piscataway: IEEE.

  Baalbergen, JF & Bauer, P (2008). Energy storage and power management strategies for generator set. In D Maga, R.H. Ansky & J Tkac (Eds.), International conference on mechatronics, mechatronika 2008 (pp. 143-154). Trencin: AD University of Trencin, Faculty of Mechatronics.

  Baalbergen, JF & Bauer, P (2008). Energy storage and power management strategies for typical 4Q-load. In s.n. (Ed.), Proceedings IECON 2008 (pp. 2332-2337). Piscataway: IEEE.

  Baalbergen, JF & Bauer, P (2008). Power management strategies for generator-set with energy storage for 4Q-load. In s.n. (Ed.), Power electronics specialists conference, 2008. PESC 2008. IEEE (pp. 3901-3906). Piscataway: IEEE.

  Baalbergen, JF & Bauer, P (2008). Survey of power management strategies for generator-set with energy storage. In s.n. (Ed.), Conference proceedings PCIM 2008 (pp. 1-6). Stuttgart: PCIM Europe.

  Baalbergen, JF & Bauer, P (2008). Verification by simulation of power management strategies for 4Q-load. In s.n. (Ed.), COMPEL 2008. 11the Workshop on control and modeling for power electronics, 2008. (pp. 1-8). Piscataway: IEEE.

  Bang, DJ, Polinder, H, Shrestha, G & Ferreira, JA (2008). Comparative design of radial and transverse flux PM generators for direct-drive wind turbines. In s.n. (Ed.), Proceedings of the 2008 international conference on electrical machines (pp. 1-6). Piscataway: IEEE.

  Bang, DJ, Polinder, H, Shrestha, G & Ferreira, JA (2008). Design of a lightweight transverse flux permanent magnet machine for direct-drive wind turbines. In s.n. (Ed.), Industry applications society annual meeting, 2008. IAS '08. IEEE (pp. 1-7). Piscataway: IEEE.

  Bang, DJ, Polinder, H & Ferreira, JA (2008). Promising direct-drive generator for large wind turbines. In ZA Styczynski & K Rudion (Eds.), 4th PhD seminar on wind energy in Europe (pp. 70-75). Magdeburg: EAWE.

  Bang, DJ, Polinder, H, Shrestha, G & Ferreira, JA (2008). Promising direct-drive generator system for large wind turbines. In s.n. (Ed.), Wind power to the grid - EPE wind energy chapter 1st seminar, 2008. EPE-WECS 2008 (pp. 1-10). Piscataway: IEEE.

  Bang, DJ, Polinder, H & Ferreira, JA (2008). Review of generator systems for direct-drive wind turbines. In s.n. (Ed.), Proceedings of the 2008 European wind energy conference, EWEC 2008 (pp. 1-11). Brussels: EWEC.

  Bauer, P, Fedak, V & Grijpink-van den Biggelaar, K (2008). Application of elearning in electrical engineering. In G Pusk�sov�, Z Szab�ov�, I Z�mecnikova, S Fejedelem & Z Szalay (Eds.), Proceedings of ICETA2008 (pp. 7-15). Star� Lesn�: Elfa, s.r.o..

  Bauer, P, Fedak, V & Hajek, V (2007). Distance and virtual laboratories. In s.n. (Ed.), Joint Czech-Polish-Slovak conference (pp. 1-4). Slapanice: s.n..

  Bauer, P (2008). Distance laboratory for teaching power electronics - Part II DC-AC. In s.n. (Ed.), COMPEL 2008. 11the Workshop on control and modeling for power electronics, 2008. (pp. 1-7). Piscataway: IEEE.

  Bauer, P, Kurka, O & Leuchter, J (2007). Energy buffers of electrical power in military use. In s.n. (Ed.), Joint Czech-Polish-Slovak conference (pp. 1-2). Slapanice: s.l..

  Bauer, P, Fedak, V & Rompelman, O (2008). PEMCWebLab - Distance and virtual laboratories in electrical engineering: development and trends. In s.n. (Ed.), Power Electronics and motion control conference, EPE-PEMC 2008 (pp. 2354-2359). Piscataway: IEEE.

  Bauer, P, Fedak, V, Hajek, V & Lampropoulos, I (2008). Survey of distance laboratories in power electronics. In s.n. (Ed.), Power electronics specialists conference, 2008. PESC 2008. IEEE (pp. 430-436). Piscataway: IEEE.

  Borisavljevic, A, Polinder, H & Ferreira, JA (2008). Motor design for magnetically levitated high-speed splindle. In L Encica, BLJ Gysen, JW Jansen & DCJ Krop (Eds.), Proceedings 2008 4th IEEE Benelux young research symposium in electrical power engineering (pp. 1-6). Eindhoven: IEEE.

  Borisavljevic, A, Polinder, H & Ferreira, JA (2008). Overcoming limits of high-speed PM machines. In s.n. (Ed.), Proceedings of the 2008 international conference on electrical machines (pp. 1-6). Piscataway: IEEE.

  Borisavljevic, A, Polinder, H, Kimman, MH , Langen, H & Ferreira, JA (2008). Very high speed motor design for magnetically levitated spindles. In s.n. (Ed.), Proc. of power conversion intelligent motion conference, PCIM 2008 (pp. 1-6). Stuttgart: Mesago PCIM GmbH.

  Cvoric, D, Haan, SWH de & Ferreira, JA (2008). CB stress reduction and comparison of energy dissipation for two types of FCLs. In s.n. (Ed.), Transmission and distribution conference and exposition, 2008. T&D. IEEE/PES (pp. 1-7). Piscataway: IEEE.

  Cvoric, D, Haan, SWH de & Ferreira, JA (2008). Comparison of the four configurations of the inductive Fault Current Limiter. In s.n. (Ed.), Power electronics specialists conference, 2008. PESC 2008. IEEE (pp. 3967-3973). Piscataway: IEEE.

  Cvoric, D, Haan, SWH de & Ferreira, JA (2008). Comparison of the two concepts of the inductive fault current limiter. In L Encica, BLJ Gysen, JW Jansen & DCJ Krop (Eds.), Proceedings 2008 4th IEEE Benelux young research symposium in electrical power engineering (pp. 1-6). Eindhoven: IEEE.

  Cvoric, D, Haan, SWH de & Ferreira, JA (2008). Improved configuration of the inductive core-saturation fault current limiter with the magnetic decoupling. In s.n. (Ed.), Industry applications society annual meeting, 2008. IAS '08. IEEE (pp. 1-7). Piscataway, NJ: IEEE.

  Fedak, V, Balogh, T, Bauer, P & Jusko, S (2008). Virtual and remote experimentation in motion control. In D Maga, RH Ansky & J Tkac (Eds.), International conference on mechatronics, Mechatronika 2008 (pp. 155-160). Trencin: AD University of Trencin, Faculty of Mechatronics.

  Gerber, M, Popovi�-Gerber, J & Ferreira, JA (2008). Integrated filter in electrolytic capacitor technology for implementation in high power density industrial drives. In s.n. (Ed.), Power electronics specialists conference, 2008. PESC 2008. IEEE (pp. 2968-2974). Piscataway: IEEE.

  Gerber, M, Popovi�-Gerber, J & Ferreira, JA (2008). Thermal and spatial design of a high power density drive. In s.n. (Ed.), Power electronics specialists conference, 2008. PESC 2008. IEEE (pp. 2955-2961). Piscataway: IEEE.

  Gutierrez Alcaraz, JM, Haan, SWH de & Ferreira, JA (2008). High voltage batteries for maritime applications. In s.n. (Ed.), Proceedings 2nd Electronics system-integration technology conference, ESTC-2008 (pp. 567-570). Piscataway: IEEE.

  Haan, SWH de & Morren, J (2008). Maximum penetration level of distributed generation without violating voltage limits. In s.n. (Ed.), Proceedings of CIRED symposium (pp. 1-4). Frankfurt: CIRED.

  Haan, SWH de & Visscher, K (2008). Virtual synchronous machines (VSG'S) for frequency stabilisation in future grids with a significant share of decentralized generation. In s.n. (Ed.), Proceedings of CIRED symposium (pp. 1-4). Frankfurt: CIRED.

  Jassal, AK, Polinder, H, Shrestha, G & Versteegh, C (2008). Investigation of slot pole combinations and wining arrangements for minimizing eddy current losses in solid back-iron of rotor for radial flux permanent magnet machines. In s.n. (Ed.), Proceedings of the 2008 international conference on electrical machines (pp. 1-5). Piscataway: IEEE.

  Lebedev, AV, Thakkar, DB, Laro, DAH, Lomonova, EA & Vandenput, AJA (2007). Contactless linear electromechanical actuator: Experimental verification of the improved design. In s.n. (Ed.), 6th International Symposium on Linear Drives for Industry Applications (pp. 1-4). Lille: s.n..

  Leuchter, J, Bauer, P, Rerucha, V & Bojda, P (2008). DC-DC converters with FPGA control for photovoltaic system. In s.n. (Ed.), Power Electronics and motion control conference, EPE-PEMC 2008 (pp. 422-427). Piscataway: IEEE.

  Maga, D, Sitar, J, Dudak, J , Hartansky, R, Siroky, P, Halgos, J & Bauer, P (2008). Electromechanical actuators Web-Lab. In s.n. (Ed.), Power Electronics and motion control conference, EPE-PEMC 2008 (pp. 2368-2370). Piscataway: IEEE.

  Polinder, H, Sousa Prado, M de & Daratha, N (2008). A first-order energy storage requirements estimation for an archimedes wave swing park. In s.n (Ed.), IEEE International Conference no Sustainable Energy Technologies (ISCET) (pp. 1161-1165). Piscataway: IEEE.

  Polinder, H (2008). Linear direct-drive permanent magnet generators for ocean wave energy conversion. In s.n. (Ed.), Permanent magnets in extreme environments (pp. 1-4). Wantage, Oxfordshire: The UK Magnetics Society.

  Popovi�-Gerber, J, Gerber, M & Ferreira, JA (2008). New system integration concept for high power density drives. In s.n. (Ed.), Power electronics specialists conference, 2008. PESC 2008. IEEE (pp. 4208-4214). Piscataway: IEEE.

  Popovi�-Gerber, J, Gerber, M & Ferreira, JA (2008). System integration approach for high power density drives. In s.n. (Ed.), Proceedings of the 5th International conference on integrated power electronics systems, CIPS 2008 (pp. 1-5). Berlin: VDE Verlag.

  Rerucha, V, Leuchter, J, Bauer, P & Krupka, Z (2008). The results of the dynamic behaviour modeling of egs with optimum variable speed. In s.n. (Ed.), ISEM 2008, International symposium on electric machinery (pp. 1-6). Prague: Czech technical university in Prague.

  Roc'h, A, Bergsma, H, Zhao, D, Ferreira, JA & Leferink, F (2008). Performance optimization aspects of common mode chokes. In s.n. (Ed.), Asia Pacific symposium on Electromagnetic compatibility and 19th international Zurich symposium on electromagnetic compatibility, 2008 (pp. 439-442). Piscataway: IEEE.

  Shrestha, G, Polinder, H, Bang, DJ, Ferreira, JA & McDonald, AS (2008). A new concept for weight reduction of large direct drive machines. In s.n. (Ed.), Proceedings of the 2008 international conference on electrical machines (pp. 1-6). Piscataway: IEEE.

  Shrestha, G, Bang, DJ, Polinder, H & Ferreira, JA (2008). Energy converters for future wind turbines. In s.n. (Ed.), Proceedings Global Wind Power China 2008 (pp. 1-8). Beijing: WPCA.

  Shrestha, G, Polinder, H, Bang, DJ & Ferreira, JA (2008). Magnetic levitation for weight reduction in direct drive machine. In s.n. (Ed.), Wind power to the grid - EPE wind energy chapter 1st seminar, 2008. EPE-WECS 2008 (pp. 1-10). Piscataway: IEEE.

  Shrestha, G, Polinder, H, Bang, DJ & Ferreira, JA (2008). Review of energy conversion system for large wind turbines. In s.n. (Ed.), Proceedings of the 2008 European wind energy conference, EWEC 2008 (pp. 1-10). Brussels: EWEA.

  Sitar, J, Racek, V, Maga, D, Dudak, J , Hartansky, R, Siroky, P & Bauer, P (2008). Distance laboratory of electromechanical actuators measurement. In D Maga, RH Ansky & J Tkac (Eds.), International conference on mechatronics, Mechatronika 2008 (pp. 99-104). Trencin: AD University of Trencin, Faculty of Mechatronics.

  Staudt, V, Steimel, A, Bauer, P & Hajek, V (2008). Power quality and active filters as web-controlled experiment in the frame of PEMC weblab. In s.n. (Ed.), Power Electronics and motion control conference, EPE-PEMC 2008 (pp. 2371-2377). Piscataway: IEEE.

  Wang, Y, Roodenburg, B & Haan, SWH de (2008). Comparative study of three transformer concepts for high current dual active bridge converters. In s.n. (Ed.), Proceedings of the 5th International conference on integrated power electronics systems, CIPS 2008 (pp. 357-360). Berlin: VDE Verlag.

  Wang, Y, Haan, SWH de & Ferreira, JA (2008). Methods for experimental assessment of component losses to validate the converter loss model. In s.n. (Ed.), Power electronics and motion control conference, EPE-PEMC 2008 (pp. 187-194). Piscataway: IEEE.

  Wolmarans, JJ, Gerber, M, Polinder, H, Haan, SWH de, Ferreira, JA & Clarenbach, D (2008). A 50kW integrate fault tolerant permanent magnet machine and motor drive. In s.n. (Ed.), Power electronics specialists conference, 2008. PESC 2008. IEEE (pp. 345-351). Piscataway: IEEE.

  Wolmarans, JJ, Polinder, H, Ferreira, JA & Clarenbach, D (2008). Design of a fault tolerant permanent magnet machine for airplanes. In s.n. (Ed.), Proceedings of the 11th international conference on electrical machines and systems (pp. 1-6). Piscataway: IEEE.

  Wolmarans, JJ, Gerber, MB, Polinder, H, Haan, SWH de, Ferreira, JA & Kermans, S (2008). Initial design of an integrated permanent magnet machine and motor drive system with fault tolerance. In L Encica, BLJ Gysen, JW Jansen & DCJ Krop (Eds.), Proceedings 2008 4th IEEE Benelux young research symposium in electrical power engineering (pp. 1-6). Eindhoven: IEEE.

  Yuan, Z, Haan, SWH de & Ferreira, JA (2008). A method of transmitting active power between converters with eliminated common DC link. In L Encica, BLJ Gysen, JW Jansen & DCJ Krop (Eds.), Proceedings 2008 4th IEEE Benelux young research symposium in electrical power engineering (pp. 1-4). Eindhoven: IEEE.

  Yuan, Z, Haan, SWH de & Ferreira, JA (2008). A new concept of exchanging active power without common DC link for Interline Power Flow Controller (S-IPFC). In s.n. (Ed.), Power and energy society general meeting - Conversion and delivery of electrical energy in the 21st century, 2008 (pp. 1-7). Piscataway: IEEE.

  Zhao, D, Ferreira, JA, Roc'h, A & Leferink, F (2008). Hierarchical EMC analysis approach for power electronics applications. In s.n. (Ed.), Power electronics specialists conference, 2008. PESC 2008. IEEE (pp. 1176-1182). Piscataway: IEEE.

  Zhao, D, Ferreira, JA, Roc'h, A & leferink, F (2008). New common mode EMI filter for motor drive using a fourth leg in the inverter. In s.n. (Ed.), Proceedings of EMC Europe 2008 (pp. 1-6). Piscataway: IEEE.

  Zhou, Y , Bauer, P & Ferreira, JA (2008). Reactive power limitation of doubly fed induction generator. In s.n. (Ed.), Proceedings of the 2008 European wind energy conference, EWEC 2008 (pp. 1-8). Brussels: EWEA.

  Zhou, Y , Bauer, P & Ferreira, JA (2008). Wind park and grid integration - a grid friendly wind power plant. In s.n. (Ed.), Proceedings of Wind Power China 2008 (pp. 1-9). Beijing: CWEA.

  Abdulrahman, H, Bauer, P & Duijsen, PJ van (2006). Simulation of flicker mitigation with the Smarttrafo. In s.n. (Ed.), Proceedings of the Taiwan power electronics conference & exhibition (pp. 301-307). Taipei: Taiwan Power Electronic Association/IEEE Taipei Chapter.

  Arkesteijn, GCM, Jong, ECW de & Polinder, H (2007). Loss modeling and analysis of the nuna solar car drive system. In s.n. (Ed.), Proceedings of the international conference on ecologic vehicles & renewable energies (EVER07) (pp. 1-10). Monaco: MC2D & MITI.

  Bang, DJ, Polinder, H, Ferreira, JA & Rooij, RPJOM van (2007). A new active speed stall control compared to pitch control for a direct-drive wind turbine. In s.n. (Ed.), EWEC 2007 Conference proceedings (pp. 1-6). Brussels: EWEA European Wind Energy Association.

  Bauer, P & Fed�k, V (2007). Distance laboratories in electrical engineering. In V Fed�k (Ed.), Proceedings of the 16th international conference on electrical drives and power electronics, EDPE 2007 (pp. 1-6). Ko�ice: Tulip.

  Bauer, P & Fed�k, V (2007). Implementation of e-learning platform for distance practical education in electrical engineering. In F Jakab & V Fed�k (Eds.), ICETA 2007 conference proceedings (pp. 189-193). Ko�ice, Slovakia: Elfa.

  Bauer, P, Maga, D, Sitar, J, Dudak, J & Hartansky, R (2007). PEMCWebLab - Distance practical education for power electronics and electrical drives. In s.n. (Ed.), 38th Annual IEEE Power electronics specialists conference: Power electronics education workshop (PEEW07) (pp. 1-6). Orlando: IEEE/PESC.

  Bauer, P & Staudt, V (2007). Remote controlled practical education for power electronics. In s.n. (Ed.), EPE 2007 12th European conference on Power electronics and applications (pp. 1-10). Brussels: IEEE/EPE Association.

  Bauer, P, Fed�k, V & H�jek, V (2007). Remote controlled practical education for power electronics and electrical drives. In L Szentirmai & T Gyula Szarka (Eds.), Joining forces in engineering education towards excellence: Proceedings SEFI and IGIP joint annual conference 2007 (pp. 1-6). Miskolc, Hungary: University of Miskolc.

  Bauer, P & Dudak, J (2007). Technology of distance measurement and monitoring for power conversion and intelligent motion. In A Rufer (Ed.), Official proceedings of the international conference PCIM Europe 2007 (pp. 1-6). Stuttgart: Mesago PCIM GmbH.

  Duijsen, P van, Bauer, P & Chen, F (2006). Modeling and simulation for wind energy. In s.n. (Ed.), Proceedings of the Taiwan power electronics conference & exhibition (pp. 1087-1092). Taipei: Taiwan Power Electronic Association/IEEE Taipei Chapter.

  Gerber, M & Ferreira, JA (2007). A system integration philosophy for demanding requirements in power electronics. In s.n. (Ed.), Conference record of the 2007 IEEE Industry applications conference (pp. 1389-1396). Piscataway: IEEE.

  Kumar, P & Bauer, P (2007). Multi-objective optimization of a BLDC drive. In D Maga, R Hart'ansk� & I Kneppo (Eds.), Proceedings of the 10th international symposium on mechatronics (pp. 9-16). Tren��n, Slovakia: AD University of Tren��n, Slovakia.

  Kumar, P & Bauer, P (2007). Optimization technique for ED&PE. In V Fed�k (Ed.), Proceedings of the 16th international conference on electrical drives and power electronics, EDPE 2007 (pp. 1-17). Ko�ice: Tulip.

  Kumar, P , Duijsen, P van & Bauer, P (2007). Rapid simulation of permanent magnet drives. In A Rufer (Ed.), Official proceedings of the international conference PCIM Europe 2007 (pp. 1-6). Stuttgart: Mesago PCIM GmbH.

  Leuchter, J, Bauer, P, Bojda, P & Rerucha, V (2007). Bi-directional DC-DC converters for supercapacitor based energy buffer for electrical gen-sets. In s.n. (Ed.), EPE 2007 12th European conference on Power electronics and applications (pp. 1-10). Brussels: IEEE/EPE Association.

  Leuchter, J, �e�ucha, V, Krupka, Z & Bauer, P (2007). Dynamic behavior of mobile generator set with variable speed and diesel engine. In s.n. (Ed.), IEEE 38th Annual power electronics specialists conference PESC07 (pp. 2287-2292). Los Angeles: IEEE.

  Leuchter, J, Bauer, P & Stekl�, V (2007). System variation of electrical GEN-SET with energy buffer. In s.n. (Ed.), PCC Nagoya 2007 conference proceedings (pp. 1401-1406). Nagoya: IEEE.

  McDonald, AS, Mueller, MA & Polinder, H (2007). Structural mass in direct-drive permanent magnet electrical generators. In s.n. (Ed.), EWEC 2007 Conference proceedings (pp. 1-9). Brussels: EWEA European Wind Energy Association.

  Meurer, EJ & Haan, SWH de (2007). On the common mode resonant frequency of transformers. In s.n. (Ed.), EPE 2007 12th European conference on Power electronics and applications (pp. 1-6). Brussels: IEEE/EPE Association.

  Mueller, MA, Polinder, H & Baker, N (2007). Current and novel electrical generator technology for wave energy converters. In s.n. (Ed.), International electric machines and drives conference IEMDC '07 (pp. 1401-1406). Piscataway: IEEE.

  Pijl, FFA van der, Bauer, P, Ferreira, JA & Polinder, H (2007). Quantum control for an experimental contactless energy transfer system for multiple users. In s.n. (Ed.), IEEE 38th Annual power electronics specialists conference PESC07 (pp. 343-349). Los Angeles: IEEE.

  Polinder, H, Bang, DJ, Rooij, RPJOM van, McDonald, AS & Mueller, MA (2007). 10 MW Wind turbine direct-drive generator design with pitch or active speed stall control. In s.n. (Ed.), International electric machines and drives conference IEMDC '07 (pp. 1390-1395). Piscataway: IEEE.

  Polinder, H, Hoeijmakers, MJ & Scuotto, M (2007). Eddy-current losses in the solid back-iron of PM machines for different concentrated fractional pitch windings. In s.n. (Ed.), International electric machines and drives conference IEMDC '07 (pp. 652-657). Piscataway: IEEE.

  Polinder, H, Mueller, MA, Scuotto, M & Goden de Sousa Prado, M (2007). Linear generator systems for wave energy conversion. In s.n. (Ed.), Proceedings of the 7th European wave and tidal energy conference (pp. 1-8). Porto: IDMEC - Institute de Engenharia Mec�nica.

  Popovi�-Gerber, J, Gerber, M & Ferreira, JA (2007). An approach to building more compact power electronic converters. In s.n. (Ed.), EPE 2007 12th European conference on Power electronics and applications (pp. 1-10). Aalborg: IEEE.

  Roc'h, A, Bergsma, H, Ferreira, JA & Leferink, F (2007). A new behavioural model for performance evaluation of common mode chokes. In s.n. (Ed.), Proceedings of the 18th International symposium on electromagnetic compatibility, EMC Zurich 2007 (pp. 1-4). Zurich: EMC Zurich.

  Roc'h, A, Zhao, D, Leferink, F, Polinder, H & Ferreira, JA (2007). Investigation of the coupling paths of a galvanic isolated AC/AC converter. In s.n. (Ed.), Proceedings of the 2007 IEEE International symposium on electromagnetic compatibility (pp. 1-6). Piscataway: IEEE.

  Roodenburg, B, Malchev, PG, Valadas Leitao, TI & Haan, SWH de (2007). Electrical characterization of conductive polymer films related to pulsed power applications. In s.n. (Ed.), Proceedings IET Symposium on Pulsed Power (pp. 53-58). Stevenage: IET.

  Shrestha, G, Polinder, H, Bang, DJ & Ferreira, JA (2007). Direct drive wind turbine generator with magnetic bearing. In s.n. (Ed.), Proceedings Offshore wind 2007 (pp. 1-10). Brussels: EWEA.

  Sitar, J, Racek, V & Bauer, P (2007). DC/DC converter with active filter supplied from trolley net. In s.n. (Ed.), IEEE 38th Annual power electronics specialists conference PESC07 (pp. 383-390). Los Angeles: IEEE.

  Triggianese, M, Morren, J, Haan, SWH de & Marino, P (2007). Improved and extended DG capability in voltage regulation by reactive and active power. In s.n. (Ed.), Power engineering, energy and electrical drives, 2007. POWERENG 2007, International conference on (pp. 583-588). Setubal: IEEE.

  Triggianese, M, Marino, P, Morren, J & Haan, SWH de (2007). Reduction of harmonics from MW-class wind turbines by interlaced active front-ends. In s.n. (Ed.), Industrial electronics, 2007, ISIE 2007, IEEE International symposium on (pp. 2607-2612). Piscataway: IEEE.

  Wang, Y, Haan, SWH de & Zwam, A van (2007). Analysis of sensitivity of the performance of interleaved flyback converter to the principal design parameters. In s.n. (Ed.), ICPE 2007 7th International conference on power electronics (pp. 85-89). s.l.: IEEE.

  Wang, Y, Haan, SWH de & Zwam, A van (2007). Novel dual-band controller for regulating DC-bus voltage that contains a large voltage ripple. In s.n. (Ed.), ICPE 2007 7th International conference on power electronics (pp. 192-196). s.l.: IEEE.

  Wolmarans, JJ & Ferreira, JA (2007). The electrical demand by transport on the grid after oil depletion. In s.n. (Ed.), PowerAfrica 2007 IEEE Power engineering society conference and exposition in Africa: full papers (pp. 1-7). Piscataway: IEEE.

  Yuan, Z, Haan, SWH de & Ferreira, JA (2007). A new FACTS component - distributed power flow controller (DPFC). In s.n. (Ed.), EPE 2007 12th European conference on Power electronics and applications (pp. 1-4). Aalborg: IEEE.

  Yuan, Z, Haan, SWH de & Ferreira, JA (2007). UPFC with eliminated common DC link connection between shunt and series part. In s.n. (Ed.), Power Engineering Society General Meeting, 2007. IEEE (pp. 1-4). Piscataway: IEEE.

  Zhao, D, Ferreira, JA & Polinder, H (2007). Common mode DC-bus filter design for variable speed drive system via transfer ratio measurements. In s.n. (Ed.), IEEE 38th Annual power electronics specialists conference PESC07 (pp. 2881-2886). Los Angeles: IEEE.

  Zhao, D, Ferreira, JA, Polinder, H, Roc'h, A & Leferink, FBJ (2007). Noise propagation path identification of variable speed drive in time domain via common mode test mode. In s.n. (Ed.), EPE 2007 12th European conference on Power electronics and applications (pp. 1-8). Aalborg: IEEE.

  Zhou, Y , Bauer, P, Ferreira, JA & Pierik, J (2007). Control of DFIG under unsymmetrical voltage dip. In s.n. (Ed.), IEEE 38th Annual power electronics specialists conference PESC07 (pp. 933-938). Los Angeles: IEEE.

  Zhou, Y , Ferreira, JA & Bauer, P (2007). Grid-connected and islanded operation of a hybrid power system. In s.n. (Ed.), PowerAfrica 2007 IEEE Power engineering society conference and exposition in Africa: full papers (pp. 1-6). Piscataway: IEEE.

  Abdulrahman, H, Bauer, P & Enslin, JHR (2006). Smarttrafo and flicker. In s.n. (Ed.), 2006 IEEE PES power systems conference and exposition (pp. 803-809). Piscataway: IEEE.

  Bauer, P & Sitar, J (2006). Detailed Analysis of Electronics for Solenoid Actuator with FEM and Circuit Simulator. In s.n. (Ed.), PCIM 2006 (pp. 129-133). N�rnberg: Mesago PCIM gmbh.

  Bauer, P, Dudak, J & Maga, D (2006). Distance practical education with DelftWebLab. In s.n. (Ed.), Proceedings 12th International Power Electronics and Motion Control Conference (pp. 2111-2117). Piscataway: IEEE.

  Bauer, P & Sitar, J (2006). Evaluation of electromagnetic actuator analysis. In s.n. (Ed.), Proceedings 37th IEEE Power Electronics Specialists Conference, PESC06 (pp. 381-387). Piscataway: IEEE.

  Dubois, MR, Dehlinger, N, Polinder, H & Massicotte, D (2006). Clawpole transverse-flux machine with hybrid stator. In s.n. (Ed.), Proceedings ICEM 2006 (pp. 1-6). Athens: National Technical University of Athens.

  Duijsen, P van, Bauer, P & Dudrik, J (2006). Fast loss predicting prototyping tools for power electronics. In s.n. (Ed.), PCIM 2006 (pp. 1-6). N�rnberg: Mesago PCIM gmbh.

  Duijsen, P van, Bauer, P, Fedak, V & Dudrik, J (2006). Survey of modelling and simulation for green and renewable energy. In T Maghiar & C Gordan (Eds.), Proceedings of the 6th international conference on renewable sources and environmental electro technologies (pp. 129-134). St�na de Vale - Spa, Romania: University of Oradea.

  Fedak, V & Bauer, P (2006). E-learning concept for electrical engineering based on INETELE modules. In D Popescu, O Bonnaud, M Hoffmann & JM Thiriet (Eds.), Proceedings of 17th EAEEIE annual conference on innovation in education for electrical and information engineering (pp. 176-181). Craiova, Romania: Universitaria Publishing House.

  Gerber, M, Ferreira, JA, Seliger, N & Hofsajer, IW (2006). Magnetic component miniaturisation for application in power electronic modules. In s.n. (Ed.), CIPS 2006 Proceedings 4th International conference on integrated power systems (pp. 1-6). Berlin: VDE Verlag.

  Goden de Sousa Prado, M, Neumann, F, Damen, MEC & Gardner, F (2005). AWS results of pilot plant testing 2004. In CM Johnstone & AD Grant (Eds.), Proceedings of the 6th European wave and tidal energy conference (pp. 401-407). Glasgow: University of Strathclyde.

  Goden de Sousa Prado, M & Gardner, F (2005). Theoretical analysis of the AWS dynamics during submersion operation. In CM Johnstone & AD Grant (Eds.), Proceedings of the 6th European wave and tidal energy conference (pp. 395-399). Glasgow: University of Strathclyde.

  Jong, ECW de, Bauer, P & Ferreira, JA (2006). 3D Integration with PCB technology. In s.n. (Ed.), APEC 2006 Proceedings (pp. 857-863). Piscataway: IEEE.

  Jong, ECW de, Ferreira, JA & Bauer, P (2006). 3D PCB Converter technology. In s.n. (Ed.), CIPS 2006, Proceedings 4th International conference on integrated power systems (pp. 1-6). Berlin: VDE Verlag.

  Jong, ECW de, Popovic, J & Ferreira, JA (2006). Design towards higher integration levels in power electronics. In s.n. (Ed.), APEC 2006 Proceedings (pp. 878-884). Piscataway: IEEE.

  Jong, ECW de, Ferreira, JA & Bauer, P (2006). Integrated flex winding realisation for 3D PCB converts. In s.n. (Ed.), Proceedings of 37th IEEE Power electronics specialists conference (pp. 2878-2884). Piscataway: IEEE Power electronics society (PELS).

  Jong, ECW de, Ferreira, JA & Bauer, P (2006). LCT integration optimization on a printed circuit board technology platform. In s.n. (Ed.), IAS 2006, Conference record of the 2006 IEEE industry applications conference (pp. 1849-1856). Piscataway: IEEE.

  Killat, U, Duijsen, PJ van & Bauer, P (2006). Integrated simulation of mechanics, electronics and control. In IFAC (Ed.), Proceedings MECHATRONICS 2006 - 4th IFAC-Symposium on Mechatronic Systems (pp. 223-227). Oxford: IFAC Publications Office.

  Kimman, MH , Langen, HH, Eijk, J van & Polinder, H (2006). Design of a Novel Miniature Spindle Concept with Active Magnetic Bearings using the Gyroscopic Stiffening Effect. In sn (Ed.), the 10th International Symposium On Magnetic Bearings (pp. 1-4). Martigny: ISMB.

  Kruse, R, Mourad, S, Foster, D & Hoeijmakers, MJ (2006). Concept and functionalities of the electric variable transmission. In H Wallentowitz & S Pischinger (Eds.), Aachen Colloquium "Automobile and Engine Technology" (pp. 1387-1398). Aachen: Aachener Kolloquium.

  Lebedev, AV, Lomonova, EA, Laro, DAH & Put, A van der (2006). Selection of Soft Magnetic Materials for a High Precision Positioning System Design. In SN (Ed.), ICEM (pp. 1-4). Chania: ICEM.

  Leuchter, J, Bauer, P, Rerucha, V & Krupka, Z (2006). Dynamic behaviour identification of electrical gen-set. In s.n. (Ed.), Proceedings 12th International Power Electronics and Motion Control Conference (pp. 1528-1535). Piscataway: IEEE.

  Leuchter, J, Bauer, P, Kurka, O & Hajek, V (2006). Efficiency investigation of mobile power sources with VSCF technology. In s.n. (Ed.), Proceedings International Symposium on Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. (pp. 475-480). Piscataway: IEEE.

  Leuchter, J, Bauer, P, Rerucha, V & Stekly, V (2006). Power management in mobile electrical power sources with supercaps as energy buffer. In s.n. (Ed.), Europe official proceedings of the international conference oiwer electronics intelligent motion power quality (pp. 1-8). Nurnberg: Mesago PCIM gmbh.

  Marambeas, PG, Stergiopoulos, P, Papthanassiou, SA, Bauer, P & Manias, S (2006). Interactive multimedia material for an electrical power quality course. In s.n. (Ed.), Proceedings 37th IEEE Power Electronics Specialists Conference, PESC 06 (pp. 381-387). Piscataway: IEEE.

  McDonald, AS, Mueller, MA & Polinder, H (2006). Comparison of generator topologies for direct-drive wind turbines including structural mass. In s.n. (Ed.), Proceedings ICEM 2006 (pp. 1-6). Athens: National Technical University of Athens.

  Meurer, EJ, Batistela, NJ, Carlson, R, Sadowski, N, Dokonal, L von & Espindola, AA de (2006). Interlaminar losses evaluation in electrical machines stators. In D Agoris, C Antunes, A Arkadan & et al (Eds.), ICEM 2006 17th International conference on electrical machines (pp. 1-6). Athens: ICEM 2006.

  Morren, J, Haan, SWH de & Ferreira, JA (2006). Primary power/frequency control with wind turbines and fuel cells. In s.n. (Ed.), Proceedings 2006 IEEE general meeting (pp. 1-8). Piscataway: IEEE.

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2006). Evaluation of IGBT modules and their suitability for ZVS, quasi-ZCS converter topologies. In s.n. (Ed.), Applied power electronics conference and exposition (APEC) 2006 (pp. 165-169). Piscataway: IEEE.

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2006). Integral design of 50 kW, 25 kHz dc-dc converter based on 4th International conference on integrated power systems, proceedings ZCS topology. In s.n. (Ed.), 4th International conference on integrated power systems, proceedings (pp. 1-6). Berlin: VDE Verlag gmbh.

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2006). Winding losses in high-current, high-frequency transformer foil windings with leakage layer. In s.n. (Ed.), 37th IEEE power electronics specialists conference (pp. 763-769). Piscataway: IEEE.

  Pierik, J, Morren, J, Engelen, T van, Haan, SWH de & Bozelie, J (2006). Development and validation of wind farm models for power system studies. In s.n. (Ed.), Proceedings European wind energy conference & exhibition (EWEC 2006) (pp. 1-7). Brussels: The European Wind Energy Association.

  Pijl, FFA van der, Ferreira, JA, Bauer, P & Polinder, H (2006). Design concept of an inductive contactless power system for multiple users. In L Dupr� & L Vandevelde (Eds.), Proceedings 3rd IEEE Benelux Young Researchers Symposium in Electrical Power Engineering (pp. 1-7). Ghent: IEEE.

  Pijl, FFA van der, Ferreira, JA, Bauer, P & Polinder, H (2006). Design of an inductive contactless power system for multiple users. In s.n. (Ed.), IAS 2006, Conference record of the 2006 IEEE industry applications conference (pp. 1876-1883). Piscataway: IEEE.

  Polinder, H, Damen, MEC, Gardner, F & Goden de Sousa Prado, M (2005). Archimedes wave swing linear permanent-magnet generator system performance. In C Johnstone & A Grant (Eds.), Proceedings of the 6th European wave and tidal energy conference (pp. 383-387). Glasgow: University of Strathclyde.

  Polinder, H, Hoeijmakers, MJ & Scuotto, M (2006). Eddy-current losses in the solid back-iron of permanent-magnet machines with concentrated fractional pitch windings. In s.n. (Ed.), 3rd IET International Conference on Power Electronics, Machines and Drives (PEMD 2006) (pp. 479-483). London: The Institution of Engineering and Technology, IET.

  Polinder, H, Overschie, PM & Spronck, JW (2006). Influence of the drive system on the performance of a magnetic levitated disk. In s.n. (Ed.), Proceedings ICEM 2006 (pp. 1-6). Athens: National Technical University of Athens.

  Polinder, H (2006). Wind turbine generator systems. In s.n. (Ed.), International conference on wind energy trends & issues (pp. 1-15). Bhopal: NITTTR.

  Popovi�, J, Ferreira, JA, Gerber, MB, Konig, A & Doncker, R de (2006). Integration technologies for high power density power electronic converters for AC drives. In s.n. (Ed.), Speedam 2006, International symposium on power electronics, electrical drives, automation and motion (pp. 634-639). Piscataway: IEEE.

  Roch, A, Bergsma, H, Leferink, F, Zhao, D, Polinder, H & Ferreira, JA (2006). Design of an EMI output filter for frequency converters. In s.n. (Ed.), International symposium on electromagnetic compatibility (pp. 123-127). Barcelona: Technical University of Catalonia.

  Scuotto, M , Polinder, H & Huizer, M (2006). Modelling and controlling attractive forces in permanent magnet machines. In s.n. (Ed.), Proceedings ICEM 2006 (pp. 1-6). Athens: National Technical University of Athens.

  Scuotto, M & O. Falc�o, AF de (2005). Wells and impulse turbines in an OWC wave power plant: a comparison. In CM Johnstone & AD Grant (Eds.), Proceedings of 6th European Wave and tidal energy conference (pp. 463-469). Glasgow: University of Strathclyde.

  Sit�r, J & Bauer, P (2006). Multidisciplinary analysis of electromechanical actuator based on FEM - circuit simulator coupling. In s.n. (Ed.), Proceedings 12th International Power Electronics and Motion Control Conference (pp. 1256-1261). Piscataway: IEEE.

  Wang, Y, Wang, D, Zhang, B, Zhou, K & Ye, Y (2006). Robust repetitive control with linear phase lead. In s.n. (Ed.), Proceedings of the 2006 American Control Conference (pp. 232-237). Piscataway: IEEE.

  Zhang, B, Wang, D, Ye, Y, Wang, Y. & Zhou, K (2006). Experimental study on pseudo-downsampled ILC with time shift along iteration axis. In s.n. (Ed.), Proceedings of the 2006 American control conference (pp. 244-249). Piscataway: IEEE.

  Zhao, D, Ferreira, JA, Polinder, H, Roch, A & Leferink, FBJ (2006). Investigation of EMI noise transfer characteristic of variable speed drive system. In s.n. (Ed.), Speedam 2006, International symposium on power electronics, electrical drives, automation and motion (pp. 603-608). Piscataway: IEEE.

  Zhao, D, Ferreira, JA & Polinder, H (2006). Noise source and transfer path analysis in variable speed drive systems. In L Dupr� & L Vandevelde (Eds.), 3rd IEEE Benelux Young researchers symposium in electrical power engineering (pp. 1-7). Ghent: IEEE.

  Zhao, D, Ferreira, JA, Roc'h, A & Leferink, FBJ (2006). Using transfer ratio to evaluate EMC design of adjustable speed drive systems. In s.n. (Ed.), International Symposium on Electromagnetic Compatibility (pp. 140-145). Barcelona: Technical University of Catalonia UPC.

  Zhou, K , Ferreira, JA & Polinder, H (2006). Superbus: A new transport concept using sustainable drive technology. In s.n. (Ed.), CIPS 2006, 4th International conference on integrated power systems, proceedings (pp. 1-6). Berlin: VDE Verlag gmbh.

  Zhou, Y , Bauer, P, Ferreira, JA & Pierik, J (2006). Aggregated models of offshore wind farm components for grid study. In s.n. (Ed.), 37th IEEE power electronics specialists conference (pp. 1-8). Piscataway: IEEE.

  Zhou, Y , Bauer, P, Ferreira, JA & Pierik, J (2006). New thyristor bridge models for dynamic simulation of grid integration of offshore wind farms. In s.n. (Ed.), Power electronics intelligent motion power quality (pp. 1-6). Stuttgart: Mesago PCIM GmbH.

  Zhou, Y , Pierik, J, Bauer, P & Ferreira, JA (2006). Wind park and grid integration issues. In RL Hendriks, BC Ummels & T Ackermann (Eds.), Sixth international workshop on large-scale integration of wind power and transmission networks for offshore wind farms (pp. 1-7). Delft: Delft University.

  Zhou, Y , Bauer, P, Ferreira, JA & Pierik, J (2006). Wind park and grid integration issues. In L Dupr� & L Vandevelde (Eds.), IEEE young researchers symposium in electrical power engineering (pp. 1-6). Ghent: Ghent University.

  Abdulrahman, H & Bauer, P (2005). Flicker mitigation with the smarttrafo. In s.n. (Ed.), Conference proceedings of the 11th European conference on power electronics and applications, EPE 2005 (pp. 1-10). Brussels: EPE Association.

  Abdulrahman, H & Bauer, P (2005). Flickering mitigation using IGBT controlled tap=changed transformer. In s.n. (Ed.), PCIM Europe 2005, Power electronics intelligent motion power quality, Official proceedings (pp. 1-7). N�rnberg: ZM Communications GmbH.

  Abdulrahman, H & Bauer, P (2005). Smarttrafo and flicker. In s.n. (Ed.), Proceedings of the International conference on future power systems (pp. 1-7). Piscataway, USA: IEEE.

  Bartal, P, Bauer, P, Hamar, J, Jardan, RK, Korondi, P, Nagy, I, S�to, Z, Zaban, K, Funato, H & Ogasawara, S (2005). Multimedia course for power electronics, nonlinear dynamics and motion control. In s.n. (Ed.), PEEW 2005 - Proceedings of the 2005 IEEE Power electronics education workshop (pp. 74-80). Piscataway, USA: IEEE.

  Bauer, P & Leuchter, J (2005). Analysis of losses in the power indirect converters. In s.n. (Ed.), Modern education in the electrotechnics and electronics (pp. 117-120). s.l.: s.n..

  Bauer, P & Duijsen, PJ van (2005). Challenges and advances in simulation. In s.n. (Ed.), Proceedings of the 36th power electronics specialists conference (pp. 1030-1036). Piscataway, USA: IEEE.

  Bauer, P & Abdulrahman, H (2005). E-learning for power electronics in future power systems. In s.n. (Ed.), Proceedings of the International conference on future power systems (pp. 1-6). Piscataway, USA: IEEE.

  Bauer, P & Nagy, I (2005). E-learning for power quality. In s.n. (Ed.), The 2005 International Power Electronics Conference IPEC-Niigata proceedings (pp. 1-5). Tokyo: The Institute of Electrical Engineers of Japan.

  Bauer, P & Fedak, V (2005). E-learning in education of electrical drives and power electronics: opportunities and challenges. In Z Bencic (Ed.), EDPE 2005 abstract and CD proceedings program (pp. 1-9). Zagreb: Korema.

  Bauer, P, Fedak, V & Hajek, V (2005). E-learning in electrical (power) engineering from idea to reality: state of the art and challenges. In s.n. (Ed.), Proceedings of 4th International Conference on Emerging e-learning Technologies and Applications (pp. 1-7). Piscataway: IEEE.

  Bauer, P, Davat, B, Fedak, V, Hajek, V, Korondi, P, Nagy, I, S�to, Z, Zaban, K, Funato, H & Ogasawara, S (2005). Educational visualization for teaching power electronics. In s.n. (Ed.), PEEW 2005 - Proceedings of the 2005 IEEE Power electronics education workshop (pp. 45-51). Piscataway, USA: IEEE.

  Bauer, P & Fedak, V (2005). Implementation of e-learning platform for electrical engineering. In ZC Zacharia & CP Constantinou (Eds.), Proceedings Computer based learning in science CBLIS 05 (pp. 387-395). Zilina: Universty of Zilina.

  Bauer, P & Duijsen, PJ van (2005). Requirements on the interface for an integrated simulator. In s.n. (Ed.), PCIM Europe 2005, Power electronics intelligent motion power quality, Official proceedings (pp. 1-6). N�rnberg: ZM Communications GmbH.

  Bauer, P, Leuchter, J & Stekly, V (2005). Simulation and animation of power electronics in modern education. In D Biolek & N Mastorakis (Eds.), Proceedings of the 4th WSEAS International Conference on: Applications of Electrical Engineering (AEE'05) (pp. 48-52). s.l.: WSEAS.

  Duijsen, PJ van, Bauer, P & Davat, B (2005). Simulation and animation of power electronics and drives, requirements for education. In s.n. (Ed.), Taiwan Power Electronics conference and Exhibition (pp. 1048-1053). s.l.: s.n..

  Enslin, J, Fan, Z & Bauer, P (2005). Principles and issues relating to the interconnection off wind power. In s.n. (Ed.), PCIM Europe 2005, Power electronics intelligent motion power quality, Official proceedings (pp. 1-6). N�rnberg: ZM Communications GmbH.

  Fedak, V, Bauer, P, Miksiewicz, R & Weiss, H (2005). Experience with e-learning for electrical engineering - from ideas to realisation. In J Moscinski & M Maciazek (Eds.), Proceedings of the International Conference on Engineering Education ICEE'2005 (pp. 1-7). Gliwice: Silesian University of Technology.

  Ferreira, JA & Popovic, J (2005). Towards new power electronic technologies for better packaging and higher levels of integration. In s.n. (Ed.), 2005 CPES Power Electronics Conference Proceedings (pp. I-16-I-25). s.l.: CPES.

  Gerber, M, Ferreira, JA, Hofsajer, IW & Seliger, N (2005). Design and evaluation of an automotive integrated system module. In s.n. (Ed.), Conference record of the 2005 IEEE industry applications conference (pp. 1144-1151). Piscataway: IEEE.

  Gerber, M, Ferreira, JA, Hofsajer, IW & Seliger, N (2005). Integral design of a high power density DC/DC converter for harsh environments. In s.n. (Ed.), Conference proceedings of the 11th European conference on power electronics and applications, EPE 2005 (pp. 1-10). Brussels: EPE Association.

  Gerber, M & Marz, M (2005). System integration in automotive power systems. In s.n. (Ed.), Conference proceedings of the 11th European conference on power electronics and applications, EPE 2005 (pp. 1-10). Brussels: EPE Association.

  Goden de Sousa Prado, M, Gardner, F, Damen, M & Polinder, H (2005). Modelling and test results of the Archimedes Wave Swing. In s.n. (Ed.), Fluid machinery for wave and tidal energy: state of the art and new developments (pp. 1-17). London: Institution of Mechanical Engineers.

  Jong, ECW de, Ferreira, JA & Bauer, P (2005). Thermal model extraction as means to thermal management improvement in PCB assembled power converters. In s.n. (Ed.), PCIM Europe 2005, Power electronics intelligent motion power quality, Official proceedings (pp. 1-6). Nuremberg: ZM Communications GmbH.

  Lebedev, AV, Lomonova, EA, Vandenput, AJA & Laro, DAH (2005). Optimal design considerations for a linear actuator with active magnetic suspension. In L Lorenz, P B�chner, P Lataire & H G�ldner (Eds.), Conference Proceedings IEEE EPE 2005 (pp. 1-10). s.l.: s.n..

  Lebedev, AV, Lomonova, EA, Laro, DAH & Vandenput, AJA (2005). Optimal design strategy for a novel linear electromechanical actuator. In H Ohsaki (Ed.), Proceedings of the Fifth International Symposium on Linear Drives for Industry Applications - LDIA2005 (pp. 294-297). Tokyo: University of Tokyo.

  Leuchter, J, Bauer, P, Rerucha, V & Kurka, O (2005). Power peaks of mobile electrical power sources with VSCF technology. In Z Bencic (Ed.), EDPE 2005 abstract and CD proceedings program (pp. 1-4). Zagreb: Korema.

  Lima Monteiro, DW de, Honorato, FP, Ferreira, JA, Soloviev, OA, Vdovin, GV & Loktev, M (2005). Y-nano X-micro Technologies: nanometric optical control. In s.n. (Ed.), Technical Proceedings of the 2005 NSTI Nanotechnology Conference and Trade Show (pp. 475-478). s.l.: s.n..

  Maga, D, Dudak, J , Zervan, D, Janosik, P & Bauer, P (2005). E-learn laboratory of electromechanical actuators: basic principles. In s.n. (Ed.), Proceedings of 8th International Symposium on Mechatronics (pp. 46-51). s.l.: s.n..

  Malyna, DV, Jong, ECW de, Ferreira, JA, Hendrix, MAM, Duarte, JL, Bauer, P & Vandenput, AJA (2005). Combined electrical and thermal modeling in power supplies. In s.n. (Ed.), Conference proceedings of the 11th European conference on power electronics and applications, EPE 2005 (pp. 1-10). Brussels: EPE Association.

  Morren, J, Haan, SWH de & Ferreira, JA (2005). (De-)stabilising effect of power electronic interfaced DG units in distributed networks. In s.n. (Ed.), Proceedings of the 11th European conference on power electronics and applications, EPE 2005 (pp. 1-10). Brussels: EPE Association.

  Morren, J, Haan, SWH de & Ferreira, JA (2005). Contribution of DG units to primary frequency control. In s.n. (Ed.), Proceedings of the International Conference on Future Power Systems (FPS 2005) (pp. 1-6). Piscataway: IEEE.

  Morren, J, Haan, SWH de & Ferreira, JA (2005). Contribution of DG units to voltage control: active and reactive power limitations. In s.n. (Ed.), Proceedings of the 2005 IEEE St. Petersburg Powertech Conference (pp. 1-7). Piscataway: IEEE.

  Papaefthymiou, G, Morren, J, Schavemaker, PH, Kling, WL & Sluis, L van der (2005). The role of power electronic converters as intelligent interfaces in distributed power systems: stochastic steady analysis. In s.n. (Ed.), CIGRE Symposium - Power systems with dispersed generation (pp. 1-8). s.l.: CIGRE.

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2005). Concept of 50kW DC/DC converter based on ZVS, Quasi-ZCS topology and integrated thermal and electromagnetic design. In s.n. (Ed.), Conference proceedings of the 11th European conference on power electronics and applications, EPE 2005 (pp. 1-9). Brussels: EPE Association.

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2005). Design for better thermal management in high-power high-frequency transformers. In s.n. (Ed.), Conference record of the 2005 IEEE industry applications conference (pp. 1-7). Piscataway: IEEE.

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2005). Partial interleaving: a method to reduce high frequency losses and to tune the leakage inductance in high current, high frequency transformer foil windings. In s.n. (Ed.), PESC'05 (pp. 1840-1547). Piscataway: IEEE.

  Polinder, H, Pijl, FFA van der, Vilder, GJ de & Tavner, P (2005). Comparison of direct-drive and geared generator concepts for wind turbines. In s.n. (Ed.), IEMDC 2005 - IEEE International Electric Machines and Drives Conference (pp. 543-550). Piscataway: IEEE.

  Polinder, H & Morren, J (2005). Developments in wind turbine generator systems. In s.n. (Ed.), ELECTRIMACS 2005, Proceedings 8th International conference on modeling and simulation of electric machines, converters and systems (pp. 1-11). Hammamet: ELECTRIMACS.

  Polinder, H, Ferreira, JA & Holm, SR (2004). Optimization of a flywheel PMSM with an external rotor and a slotless stator. In s.n. (Ed.), Proceedings of the international conference on electrical machines and systems (ICEMS) (pp. 1-7). s.l.: s.n..

  Polinder, H & Scuotto, M (2005). Wave energy converters and their impact on power systems. In s.n. (Ed.), Proceedings of the International Conference on Future Power Systems 2005 (pp. 1-9). Piscataway: IEEE.

  Popovic, J & Ferreira, JA (2005). Design and evaluation of highly integrated DC-DC converters for automotive applications. In s.n. (Ed.), Conference record of the 2005 IEEE industry applications conference fortieth IAS Annual meeting (pp. 1152-1159). Piscataway: IEEE.

  Popovic, J, Ferreira, JA & Waffenschmidt, E (2005). PCB embedded DC/DC 42V/14V converter for automotive applications. In s.n. (Ed.), Conference proceedings of the 11th European conference on power electronics and applications, EPE 2005 (pp. 1-10). Brussels: EPE Association.

  Reza, M, Morren, J, Schavemaker, PH, Kling, WL & Sluis, L van der (2005). Power electronic interfaced DG units: impact of control strategy on power system transient stability. In s.n. (Ed.), Proceedings of the 3rd IEE International Conference on Reliability of Transmission and Distribution Networks (RTDN 2005) (pp. 1-4). London, UK: IEE.

  Roodenburg, B, Kaanders, MAM & Huijser, T (2005). First results from an electro-magnetic (EM) drive high acceleration of a circuit breaker contact for a hybrid switch. In s.n. (Ed.), Proceedings of the 11th European conference on power electronics and applications, EPE 2005 (pp. 1-10). Piscataway: IEEE.

  Roodenburg, B, Huijser, T & Evenblij, B (2005). Simulation of an electro magnetic (EM) drive for a fast opening circuit breaker contact. In s.n. (Ed.), The IEE Pulsed power symposium 2005 IET conference publication series (pp. 1-6). Stevenage: IEE.

  Tonso, M, Morren, J, Haan, SWH de & Ferreira, JA (2005). Variable inductor for voltage control in distributed networks. In s.n. (Ed.), Proceedings of the 11th European conference on power electronics and applications, EPE 2005 (pp. 1-8). Brussels: EPE Association.

  Wijnbergen, S, Haan, SWH de & Slootweg, JG (2005). A system for dispersed generator participation in voltage control and primary frequency control. In s.n. (Ed.), PESC'05: IEEE 36th annual power electronics specialists conference (pp. 2918-2924). Piscataway: IEEE.

  Zhang, B, Zhou, K , Ye, Y & Wang, D (2005). Design of linear phase lead repetitive control for CVCF PWM DC-AC converters. In s.n. (Ed.), The proceedings of the 2005 American Control Conference (pp. 1154-1159). Piscataway: IEEE.

  Bauer, P (2004). E-learning for better understanding of power quality problems and compensators. In EPE-PEMC 2004; Eleventh international power electronics and motion control conference (pp. 1-6). Brussels: European Power Electronics Association.

  Bauer, P & Fedak, V (2004). Educational visualization of different aspects for power circuits and electrical drives. In EPE-PEMC 2004; Eleventh international power electronics and motion control conference (pp. 1-8). Brussels: European Power Electronics Association.

  Bauer, P, Ferreira, JA, Spanjaard, S & Hollander, M (2004). Innovative efficient gradient coil driver topology. In APEC 2004; 19th Annual IEEE applied power electronics conference and exhibition (pp. 1-6). Piscataway: IEEE.

  Bauer, P & Enslin, JHR (2004). Interactive training and planning tool using web-based animations. In PES 2004; IEEE power systems conference and exposition (pp. 1-5). Piscataway: IEEE.

  Bauer, P (2004). Understanding the power quality problems and compensators. In PCIM 2004; Proceedings of the international conference power electronics intelligent motion power quality (pp. 1-5). Nurnberg, Germany: ZM Communications.

  Bussel, GJW van, Mertens, S, Polinder, H & Sidler, HFA (2004). TURBY: concept and realisation of small vawt for the built environment. In Proceedings of the Science of making torque from wind (pp. 509-516). Delft: Duwind.

  Bussel, GJW van, Polinder, H & Sidler, HFA (2004). The development of Turby, a small vawt for the built environment. In Proceedings of the global windpower 2004 conference & exhibition (pp. 1-10`). Washington: AWEA.

  Davat, B, Bauer, P & Duijsen, PJ van (2004). Teaching of power electronics: From graphic representation to animation. In EPE-PEMC 2004 Eleventh international power electronics and motion control conference (pp. 1-6). Brussels: European Power Electronics Association.

  Dubois, M & Polinder, H (2004). Comparison between TFPM generator with toothed rotor and conventional PM synchronous generator for direct-drive wind turbines. In S Wiak, M Dems & K Komeza (Eds.), ICEM 2004; Conference proceedings of the16th International conference on electrical machines (pp. 1-6). Lodz, Poland: Insttitute of Mechatronics and Information Systems.

  Dubois, M & Polinder, H (2004). Effect on air gap thickness on transverse-flux permanent magnet (TFPM) machines with flux-concentration. In S Wiak, M Dems & K Komeza (Eds.), ICEM 2004; Conference proceedings of the 16th international conference on electrical machines (pp. 1-6). Lodz, Poland: Technical University of Lodz.

  Dubois, M & Polinder, H (2004). Study of TFPM machines with toothed rotor applied to direct-drive generators for wind turbines. In NORPIE 2004; Nordic workshop on power and industrial electronics (pp. 1-9). Trondheim: Norwegian University of Science and Technology.

  Duijsen, P van, Gospodaric, D & Bauer, P (2004). Simulation based optimization of electrical drives. In PCIM 2004; Proceedings of the international conference power electronics intelligent motion power quality (pp. 1-6). Nurnberg, Germany: ZM Communications.

  Duijsen, P van, Bauer, P & Killat, U (2004). Thermal simulation of power electronics. In PCIM 2004; Proceedings of the international conference power electronics intelligent motion power quality (pp. 1-6). Nurnberg, Germany: ZM Communications.

  El-Husseini, MH, Bennani, A, Spronck, JW, Polinder, H, Eijk, J van & Compter, JC (2004). Evaluation of the radial dynamic stiffness of an ironless motor for precision engineering applications. In S Wiak, M Dems & K Komeza (Eds.), ICEM 2004: 16th international conference on electrical machines. Book of digests. Vol. 3 (pp. 817-822). Lodz: Institute of Mechatronics and Information Systems.

  El-Husseini, MH, Bennani, A, Spronck, JW, Polinder, H, Langen, HH, Compter, JC & Eijk, J van (2004). Low-stiffness motor: review of different ironless motor topologies for use in precision engineering applications. In S Wiak, M Dems & K Komeza (Eds.), ICEM 2004: 16th international conference on electrical machines. Book of digests. Vol. 1 (pp. 181-185). Lodz: Institute of Mechatronics and Information Systems.

  Fedak, V, Bauer, P, Hajec, V, Duijsen, P van, Weiss, H, Davat, B, Manias, S, Nagy, I, Korondi, P, Miksiewicz, R & Smekal, P (2004). Interactive and unified e-based education in electrical engineering. In F Jakab, L Samuelis, I Sivy & M Bucko (Eds.), ICETA 2004; Conference proceedings of the Third international conference on emerging telecommunications technologies and applications and the workshop organisation an management of scientific, technology and industrial parks (pp. 431-435). Kosice, Slovak Republik: Elfa.

  Ferreira, JA, Dorland, P & Beer, FG de (2004). An active in-line notch filter for reducing acoustic noise in drives. In s.n. (Ed.), IEEE Conference Record 04CH37569C (pp. 1-7). Piscataway: IEEE.

  Gerber, M, Ferreira, JA, Hofsajer, IW & Seliger, N (2004). An improved 3D integrated DC/DC converter for high temperature environments. In s.n. (Ed.), 2004 IEEE 35th Annual Power Electronics Specialists Conference (pp. 2779-2785). Piscataway: IEEE.

  Gerber, M, Ferreira, JA, Hofsajer, IW & Seliger, N (2004). High temperature, high power density packaging for DC/DC converters. In Young researchers symposium in Electrical power engineering; Theme Intelligent Energy Conversion (pp. 1-6). Piscataway: IEEE.

  Gerber, M, Ferreira, JA, Hofsajer, IW & Seliger, N (2004). Interleaving optimization in synchronous rectified DC/DC converters. In 2004 IEEE 35th Annual Power Electronics Specialists Conference (pp. 4655-4661). Piscataway: IEEE.

  Hoeijmakers, MJ (2004). An induction machine model based on analytic two-dimensional field computations. In SPEEDAM 2004; Symposium on power electronics, electrical devices, automation and motion (pp. 43-48). s.l.: s.n..

  Hoeijmakers, MJ & Ferreira, JA (2004). The electrical variable transmission. In 2004 IEEE industry applications conference/39th IAS annual meeting (pp. 1-8). Piscataway: IEEE.

  Hoeijmakers, MJ & Rondel, M (2004). The electrical variable transmission in a city bus. In PESC'04; Proceeding of the 2004 IEEE 35th annual power electronics specialists conference (pp. 2773-2778). Piscataway: IEEE.

  Jong, ECW de, Ferreira, JA & Bauer, P (2004). Evaluating thermal management efficiency in converters. In PESC'04; Conference proceedings of the 35th IEEE annual power electronics specialists conference (pp. 1-7). s.l.: IEEE.

  Jong, ECW de, Ferreira, JA & Bauer, P (2004). Improving the thermal management of AC-DC converters using integration technologies. In IEEE/IAS 39th annual meeting (pp. 1-8). s.l.: IEEE.

  Jong, ECW de, Ferreira, JA & Bauer, P (2004). Thermal management in PCB assembled power supply technologies. In Conference proceedings of the IEEE young researchers symposium in electrical power engineering (pp. 1-6). s.l.: s.n..

  Kumar, P , Gospodaric, D & Bauer, P (2004). An approach to optimisation of permanent magnet DC motors. In IEEE young researchers symposium in electrical power engineering (pp. 1-5). S.l.: S.n..

  Kurka, O, Leuchter, J & Bauer, P (2004). The effect of power electronic converters on the efficiency of permanent magnet synchronous generator on electrical power generating sets. In G Kaminski & K Dabala (Eds.), SME 2004; Proceedings of the XL international symposium on electrical machines (pp. 300-303). Warsaw, Poland: Electrotechnical Institute.

  Laro, DAH, Ven, SCL, Spronck, JW, Lebedev, AV, Lomonova, EA & Dag, B (2004). A linear magnetic bearing with integrated long stroke propulsion - design and realization of an IU-module. In S.n. (Ed.), PEMD 2004: 2nd international conference on power electronics, machines and drives. Vol. 2 (pp. 431-435). London: IEE.

  Lebedev, AV, Lomonova, EA, Leuven, PG van, Steinberg, J & Laro, DAH (2004). Analysis and initial synthesis of a novel linear activator with active magnetic suspension. In S.n. (Ed.), Converting theory to practice: conference record of the 2004 IEEE industry applications conference - 39th IAS annual meeting. Vol. 3 (pp. 2111-2118). Piscataway: IEEE.

  Leuchter, J, Kurka, O, Bauer, P & Hajek, V (2004). Configuration for mobile power source. In PCIM 2004; Proceedings of the international conferemce power electronics intelligent motion power quality (pp. 1-6). Nurnberg, Germany: ZM Communications.

  Leuchter, J, Bauer, P, Kurka, O & Polinder, H (2004). Generator-convertor set for mobile power sources. In EPE-PEMC 2004; Eleventh international power electronics and motion control conference (pp. 1-6). Brussels: European Power Electronics Association.

  Mecrow, BC, Jack, A & Polinder, H (2004). Survey of low speed machine topologies for direct drive marine renewable energy converters. In IEE seminar electrical aspects of offshore renewable energy systems (pp. 1-27). Stevenage, UK: IEE.

  Morren, J, Haan, SWH de & Ferreira, JA (2004). Distributed generation units contributing to voltage control in distribution networks. In UPEC 2004; 39th International universities power engineering conference (pp. 789-793). Bristol: The University of the West of England.

  Morren, J, Pierik, JTG & Haan, SWH de (2004). Fast dynamic modelling of direct-drive wind turbines. In PCIM Europe 2004; International exhibition and conference for power electronics intelligent motion power quality (pp. 1-6). Nurnberg: ZM Communications.

  Morren, J, Haan, SWH de & Ferreira, JA (2004). Model reduction and control of electronic interfaces of voltage dip proof DG units. In PES 2004; IEEE power engineering society general meeting (pp. 1-6). Piscataway: IEEE.

  Morren, J, Pierik, JTG & Haan, SWH de (2004). Voltage dip ride-through control of direct-drive wind turbines. In UPEC 2004; 39th International universities power engineering conference (pp. 934-938). Bristol: The University of the West of England.

  Pierik, JTG, Morren, J, Haan, SWH de, Engelen, T van, Wiggelinkhuizen, E & Bozelie, J (2004). Dynamic models of wind farm for grid-integration studies; case sudies results. In NWPC'04; Nordic wind power conference (pp. 1-6). Goteborg: Chalmers University of Technology.

  Polinder, H (2004). A linear permanent-magnet machine for the Archimedes Wave Swing: Design and practicle experience. In IEE seminar electrical aspects of offshore renewable energy systems (pp. 1-13). Stevenage, UK: IEE.

  Polinder, H, Haan, SWH de, Dubois, M & Slootweg, JG (2004). Basic operation principles and electrical conversion systems of wind turbines. In NORPIE 2004; Nordic workshop on power and industrial electronics (pp. 1-9). Trondheim: Norwegian University of Science and Technology.

  Polinder, H, Bussel, GJW van & Dubois, M (2004). Design of a PM generator for the Turby, a wind turbine for the built environment. In S Wiak, M Dems & K Komeza (Eds.), ICEM 2004; Conference proceedings of the 16th international conference on electrical machines (pp. 1-6). Lodz, Poland: Institute of Mechatronics and Information Systems.

  Popovic, J & Ferreira, JA (2004). A modular, laminar 42/14V DC/DC converter concept with integrated thermal busbar. In Conference record of the 2004 IEEE Industry applications conference (pp. 2323-2329). Piscataway: IEEE.

  Popovic, J & Ferreira, JA (2004). Concepts for high packaging and integration efficiency. In s.n. (Ed.), 2004 IEEE 35th Annual Power Electronics Specialists Conference (pp. 4188-4194). Piscataway: IEEE.

  Popovic, J & Ferreira, JA (2004). Modular technology concepts for 42V/14V automotive converters. In s.n. (Ed.), Power electronics intelligent motion power quality PCIM 2004 (pp. 875-880). Nurnberg, Germany: ZM Communications GMBH.

  Popovic, J & Ferreira, JA (2004). Packaging and integration issues in power electronics. In s.n. (Ed.), Young researchers symposium in electrical engineering; Theme Intelligent energy conversion (pp. 1-6). Piscataway: IEEE.

  Rampen, S, Haan, SWH de, Dill, RB, Roodenburg, B, Creyghton, YLM & Ferreira, JA (2004). Series resonance power supply for dielectric barrier reactor. In EPE-PEMC 2004; Eleventh international power electronics and motion control conference (pp. 1-7). S.l.: S.n..

  Reza, M, Morren, J, Schavemaker, PH, Slootweg, JG, Kling, WL & Sluis, L van der (2004). Impacts of converter connected distributed generation on power system transient stability. In Proceedings of the IEEE young researchers symposium in electrical power engineering; theme intelligent energy conversion (pp. 1-6). Delft: IEEE.

  Roodenburg, B, Evenblij, BH & Huijser, T (2004). Simulation of a flat spiral inductor-disk geometry for electro-magnetic (EM) acceleration. In EPPS 2004; Second European pulsed power symposium (pp. 202-206). Aachen, Germany: Shaker.

  Weiss, H, Schmidhofer, A, Schmid, A, Hajek, V, Davat, B, Manias, S, Nagy, I, Korondi, P, Jardan, RK, Miksiewicz, R, Fedak, V, Smekal, P, Bauer, P & Duijsen, P van (2004). Animated and interactive e-learning concept and realization. In V Uskov (Ed.), Proceedings of the IASTED international conference on web-based education (pp. 151-156). Anaheim, CA. USA: ACTA Press.

  Zhao, D, Duijn, J van, leferink, F & Etten, W.C. van (2004). EMI synthesis and preventive methods for PWM driven DC motors. In Proceedings International symposium on electromagnetic compatibility (pp. 1-3). Eindhoven, The Netherlands: Eindhoven University of Technology.

  Bauer, P & Schoevaars, R (2003). Bidirectional switch for a solid state tap changer. In s.n. (Ed.), PESC'03; Proceedings (pp. 466-471). Piscataway: IEEE.

  Bauer, P & Fed�k, V (2003). E-learning for power electronics and electrical drives. In Electrical drives and power electronics proceedings (pp. 567-572). Ko�ice, Slovak Republic: EDPE 2003 Organising Committee.

  Bauer, P, Korondi, P & Duijsen, PJ van (2003). Integrated control - Simulation design approach. In s.n. (Ed.), Europe 2003; Official proceedings international conferences ZM Communications GmbH (pp. 227-233). s.l.: s.n..

  Bauer, P (2003). New robust switching commutation for a tap changer. In EPE 2003 Tenth European conference on electronics and applications (pp. 1-10). Brussels: EPE Association.

  Duijsen, P van, Bauer, P & Lascu, D (2003). Selection of semiconductor models in power electronics simulation. In Europe 2003; Official proceedings international conferences ZM Communications GmbH (pp. 543-549).

  El-Husseini, MH, Slinkman, CJ, Polinder, H, Spronck, JW & Eijk, J van (2003). Low noise linear power amplifier for precision active magnetic bearings application. In s.n. (Ed.), PCIM Europe 2003; international exhibition & conference for power electronics, intelligent motion, power quality (pp. 1-6). Nurnberg: ZM Communications.

  El-Husseini, MH, Bennani, S, Spronck, JW, Polinder, H, Eijk, J van & Compter, JC (2003). Low-stiffness motor for precision active magnetic bearing applications. In s.n. (Ed.), Proceedings 7th International symposium on magnetic suspension technology (pp. 37-43). s.l.: s.n..

  Enslin, JHR, Knijp, J, Jansen, CPJ & Bauer, P (2003). Integrated approach to network stability and wind energy technology for on-shore and offshore applications. In Europe 2003; Official proceedings international conferences ZM Communications GmbH (pp. 185-193).

  Fed�k, V, Bauer, P, H�jek, V, Weiss, H, Davat, B, Manias, S, Nagy, I, Korondi, P, Miksiewicz, R, Duijsen, P van & Sm�kal, P (2003). Interactive E-learning in electrical engineering. In Electrical drives and power electronics proceedings (pp. 368-373). Ko�ice, Slovak Republic: EDPE 2003 Organising Committee.

  Ferreira, JA & Popovic, J (2003). Packaging, integration, thermal management - from the state of the art to future trends. In s.n. (Ed.), PCIM Europe 2003 International Exhibition and conference for power electronics intelligent motion power quality (pp. 1-10). Nurnberg: ZM Communications.

  Gerber, MB, Ferreira, JA, Hofsajer, IW & Seliger, N (2003). High temperature, high power density packaging for automotive applications. In s.n. (Ed.), PESC'03 34th IEEE power electronics specialists conference (pp. 1-8). Piscataway: IEEE.

  Gerber, MB, Ferreira, JA, Hofsajer, IW & Seliger, N (2003). Optimal interleaving of DC/DC converters in automotive applications. In s.n. (Ed.), EPE 2003 Tenth European conference on power electronics and applications (pp. 1-10). Brussels: EPE Association.

  Haan, SWH de, Roodenburg, B, Creyghton, YLM, Fiala, A & Huijser, T (2003). High-voltage pulsed-power supplies for automotive exhaust gas treatment with dielectric barrier reactor. In JJ Smit (Ed.), High voltage engineering (pp. 1-4). Rotterdam: Millpress.

  Korondi, P, Bauer, P & Duijsen, PJ van (2003). Integrated control and circuit simulation for a motion control system. In EPE 2003 Tenth European conference on electronics and applications (pp. 1-10). Brussels: EPE Association.

  Leuchter, J, Bauer, P & Kurka, O (2003). Vliv v�konov� elektroniky na ��innost ztr�ty v nov� generaci mobiln�ch zdroj� elektrick� energie [Influence of power electronics on efficiency and losses in new generation of mobile energy sources. In J Skalick� & Z Feiler (Eds.), Conference proceedings of EPE 2003 (pp. 95-102). Brno.

  Morren, J, Haan, SWH de, Bauer, P, Pierik, JTG & Bozelie, J (2003). Comparison of complete and reduced models of a wind turbine with Doubly-Fed induction generator. In s.n. (Ed.), EPE 2003: Tenth European conference on power electronics and applications (pp. 1-10). Brussel: EPE.

  Morren, J, Pierik, JTG, Haan, SWH de & Bozelie, J (2003). Fast dynamic models of offshore wind farms for power system studies. In s.n. (Ed.), Fourth international workshop on large-scale integration of wind power and transmission networks for offshore wind farms (pp. 1-8). Stockholm: ETS.

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2003). A ZVS, Quasi-ZCS converter with an improved power rating for 14/42V automotive application. In s.n. (Ed.), PESC'03 34th IEEE power electronics specialists conference (pp. 628-633). Piscataway: IEEE.

  Pavlovsky, M & Bauer, P (2003). Cable selection and shunt compensation for offshore windparks. In s.n. (Ed.), PCIM Europe 2003 International exhibition and conference for power electronics intelligent motion power quality (pp. 1-7). Nurnberg: ZM Communications.

  Pavlovsky, M & Bauer, P (2003). Cable selection and shunt compensation for offshore windparks. In s.n. (Ed.), Europe 2003; Official proceedings international conferences ZM Communications GmbH (pp. 361-369). s.l.: s.n..

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2003). The ZVS, Quasi-ZCS converters, a family of topologies with an optimal current waveform for high frequency switching. In s.n. (Ed.), EPE 2003 Tenth European conference on power electronics and applications (pp. 1-9). Brussels: EPE Association.

  Polinder, H, Dubois, M & Slootweg, JG (2003). Generator systems for wind turbines. In s.n. (Ed.), PCIM Europe 2003 International exhibition and conference for power electronics intelligent motion power quality (pp. 1-6). N�rmberg: ZM Communications.

  Polinder, H, Mecrow, BC, Dickinson, AGJP & Mueller, MK (2003). Linear generators for direct-drive wave energy conversion. In s.n. (Ed.), IEMDC 2003; IEEE International electric machnies and drives conference (pp. 798-804). Piscataway: IEEE.

  Polinder, H, Slootweg, JG, Hoeijmakers, MJ & Compter, JC (2003). Modelling of a linear PM machine including magnetic saturation and end effects: maximum force to current ratio. In IEMDC 2003 International electric machines and drives conference (pp. 805-811). Piscataway: IEEE.

  Popovic, J & Ferreira, JA (2003). An approach to deal better with power electronics packaging. In EPE 2003 Tenth European conference on electronics and applications (pp. 1-9). Brussels: EPE Association.

  Popovic, J, Ferreira, JA & Horck, FBM van (2003). Evaluating packaging effectiveness in power electronics. In s.n. (Ed.), PESC'03 34th IEEE power electronics specialists conference (pp. 881-886). Piscataway: IEEE.

  Roodenburg, B, Morren, J, Haan, SWH de & Berg, HE (2003). Corrosion experiments in a pulsed electric field (PEF) treatment chamber with stainless steel electrodes fed with three different pulse shapes. In The IEE materials & devices professional network; pulsed power seminar (pp. 7/1-7/4). Stevenage; UK: Institution of Electrical Engineers.

  Roodenburg, B & Evenblij, BH (2003). Current source semiconductor opening switch with parallel IGCT'S. In s.n. (Ed.), The IEE materials & devices professional network; pulsed power seminar (pp. 2/1-2/4). Stevenage, UK: Institution of Electrical Engineers.

  Bauer, P, Schoevaars, R, Ouden, C den & Duijsen, P van (2002). Bidirectional switch for a solid state tap changer simulation. In 2002 Power Electronics Conference (pp. 35-39). s.l.: s.n..

  Bauer, P & Schoevaars, R (2002). Commutation cell for electronic tap changer - simulation and experimental study. In C Zieroth (Ed.), PCIM 2002 Europe Proceedings of the Forty-Fifth International Power Electronics Conference (pp. 1-6). Nurnberg, Germany: ZM Communications.

  Bauer, P & Duijsen, P van (2002). Development of embedded control based on simulation. In EPE-PEMC 2002 10th International Power Electronics and Motion Control Conference (pp. 1-9). s.l.: s.n..

  Bauer, P & Duijsen, P van (2002). Integrated simulation of embedded controls in power electronics. In C Zieroth (Ed.), PCIM 2002 Europe Proceedings of the Thirty-Ninth International Intelligent Motion Conference (pp. 295-301). Nurnberg, Germany: ZM Communications.

  Bauer, P, Haan, SWH de & Dubois, M (2002). Windenergy and offshore windparks: state of the art and trends. In EPE-PEMC 2002 10th International Power Electronics and Motion Control Conference (pp. 1-15). s.l.: s.n..

  Berg, A van den, Botter, H, Kwakernaak, A, Soetens, F & Vlot, A (2002). The effect of specimen geometry on measured yield stress of adhesives. In Proceedings of WCARP II (pp. 74-76).

  Creyghton, YLM, Beurskens, R, Fiala, A & Haan, SWH de (2002). Power source for inactivation of micro-organisms with partial high voltage discharge in a continuous process. In PMC 2002 International Power Modulator Conference and High Voltage Workshop (pp. 1-5). s.l.: IEEE.

  Dubois, M, Polinder, H & Ferreira, JA (2002). Influence of air gap thickness in transverse flux permanent magnet (TFPM) generators for wind turbine application. In IEEE Young Researchers Symposium in Electrical Power Engineering (pp. 1-7). s.l.: s.n..

  Dubois, M, Polinder, H & Ferreira, JA (2002). Prototype of a new tranverse-flux permanent magnet (TFPM) machine with toothed rotor. In 15th International Conference on Electrical Machines (pp. 1-6). s.l.: s.n..

  Dubois, M, Polinder, H & Ferreira, JA (2002). Transverse-flux permanent magnet (TFPM) machine with toothed rotor. In International Conference on Power Electronics, Machines and Drives (pp. 309-314). s.l.: IEE.

  Ferreira, JA, Kane, I, Klinkert, P & Hage, T (2002). An inventer for generating harmonic rich current waveforms for aircraft mounted electromagnetic surveying systems. In 2002 IEEE Industry Applications Conference/37th IAS Annual Meeting (pp. 1-6). Piscataway, NJ. USA: IEEE.

  Ferreira, JA, Waffenschmidt, E, Strydom, JT & Wyk, JD van (2002). Embedded capacitance in the PCB of switchmode converters. In PESC'02 33rd Annual IEEE Power Electronics Specialists Conference (pp. 1-5). Piscataway, NJ. USA: IEEE.

  Ferreira, JA (2002). High power densities with three dimensional integration. In EPE-PEMC 2002 10th International Power Electronics and Motion Control Conference (pp. 1-12). Brussels, Belgium: EPE Association.

  Gerber, MB, Ferreira, JA, Hofsajer, IW & Seliger, N (2002). A high power density DC/DC converter for automotive applications. In SAUPEC 2002 Proceedings of the Eleventh Southern African Universities Power Engineering Conference (pp. 1-6). Piscataway, NJ, USA: IEEE.

  Gerber, MB, Ferreira, JA, Hofsajer, IW & Seliger, N (2002). A very high density, heatsink mounted inducator for automotive applications. In 2002 IEEE Industry Appications Conference/37th IAS Annual Meeting (pp. 1-7). Piscataway, NJ. USA: IEEE.

  Gerber, MB, Ferreira, JA, Hofsajer, IW & Seliger, N (2002). Design considerations for high density planar inductors. In SAUPEC 2002 Proceedings of the Eleventh Southern Africal Universities Power Engineering Conference (pp. 1-7). s.l.: s.n..

  Gerber, MB, Ferreira, JA, Hofsajer, IW & Seliger, N (2002). High density packaging of the passive components in an automotive DC/DC converter. In PESC'02 33rd Annual IEEE Power Electronics Specialists Conference (pp. 1-7). Piscataway, NJ. USA: IEEE.

  Haan, SWH de, Roodenburg, B, Morren, J & Prins, H (2002). Technology for preservation of food with pulsed electric fields (PEF). In AFRICON'02 2002 IEEE 6th Africon Conference in Africa Electrotechnological Services for Africa (pp. 791-796). Piscataway, NJ. USA: IEEE.

  Holm, SR, Polinder, H, Ferreira, JA, Gelder, P van & Dill, R (2002). A comparison of energy storage technologies as energy buffer in renewable energy sources with respect to power capability. In IEEE Young Researchers Symposium in Electrical Power Engineering; Theme: Distributed Generation (pp. 1-6). Piscataway, NJ, USA: IEEE.

  Holm, SR, Polinder, H, Ferreira, JA, Hoeijmakers, MJ, Gelder, P van & Dill, R (2002). Analytical calculation of the magnetic field in electrical machines due to the current density in an airgap winding. In 15th International Conference on Electrical Machines (pp. 1-6). Antwerp: Technology Institute.

  Holm, SR, Polinder, H, Ferreira, JA, Gelder, P van & Dill, R (2002). Comparison of three permanent magnet structures with respect to Torque production by means of analytical field calculations. In International Conference on Power electronics, Machines and Drives (pp. 409-414). London: IEE.

  Jong, ECW de, Hofsajer, IW & Ferreira, JA (2002). A new approach to low conversion ratio DC-DC converter. In PESC'02 33rd Annual IEEE Power Electronics Specialists Conference (pp. 1-6). Piscataway, NJ. USA: IEEE.

  Linde, R van der, Hofsajer, IW & Ferreira, JA (2002). A novel DC-DC converter for low voltage ratio conversion. In AFRICON'02 2002 6th IEEE Africon Conference in Africa Electrotechnological Services for Africa (pp. 1-6). Piscataway, NJ. USA: IEEE.

  Molenaar, DP, Bosgra, OH & Hoeijmakers, MJ (2002). Identification of synchronous generator transfer functions from standstill test data. In 2002 ASME wind energy symposium (pp. 331-339). New York: American Institute of Aeronautics and Astronautics.

  Morren, J, Haan, SWH de & Ferreira, JA (2002). High-voltage DC-DC converter for offshore windfarms. In IEEE Young Researchers Symposium in Electrical Power Engineering; Theme: distributed generation (pp. 1-6). s.l.: s.n..

  Nusimovich, I, Haan, SWH de & Slootweg, JG (2002). Comparison of the energy yield of wind turbines with individual ac/dc/ac converter and wind turbines connected to a common ac/dc/ac converter. In EPE-PEMC 2002 10th International Power Electronics and Motion Control Conference (pp. 1-5). Brussels: EPE Association.

  Nusimovich, I, Haan, SWH de, Slootweg, JG & Polinder, H (2002). Investigations on the effect of field weakening on the efficiency of generators for wind turbines. In EPE-PEMC 2002 10th International Power Electronics and Motion Control Conference (pp. 1-8). s.l.: s.n..

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2002). Comparison of DC/DC converter topologies with, and without transformer. In EPE-PEMC 2002 10th International Power Electronics and Motion Control Conference (pp. 1-11). Brussels: EPE Association.

  Pavlovsky, M, Haan, SWH de & Ferreira, JA (2002). Comparison of full-bridge and boost DC/DC converter topologies. In IEEE Young Researchers Symposium in Electrical Power Engineering; Theme: Distributed Generation (pp. 1-7). s.l.: s.n..

  Polinder, H, Slootweg, JG, Compter, JC & Hoeijmakers, MJ (2002). Modelling a linear PM motor including magnetic saturation. In International Conference on Power Electronics, Machines and Drives (pp. 632-637). London: IEE.

  Polinder, H, Damen, MEC & Gardner, F (2002). Modelling and test results of the AWS linear PM generator systems. In 15th International Conference on Electrical Machines (pp. 1-6). s.l.: s.n..

  Roodenburg, B, Morren, J, Haan, SWH de, Wouters, PC, Jong, G de, Pol, IE & Creygthon, YLM (2002). High-voltage arc pulser for preservation of liquid food. In European Pulsed Power Symposium (pp. 1-6). London: IEE.

  Roodenburg, B, Morren, J, Haan, SWH de, Prins, HA & Creyghton, YLM (2002). Modeling a 80 kV pulse source for Pulsed Electric Fields (PEF). In EPE-PEMC 2002 10th International Power Electronics and Motion Control Conference (pp. 1-12). Brussels: EPE Association.

  Roodenburg, B, Jong, G de, Pol, IE, Morren, J, Dutreux, N, Wouters, PC & Beurskens, RHSH (2002). Preservation of liquid food by pulsed high-voltage arc discharges. In SfAM 2002 Frontiers in Microcial Fermentation and Preservation (pp. 145-148). Bedford, UK: SfAM.

  Slootweg, JG, Haan, SWH de, Polinder, H & Kling, WL (2002). Aggregated modelling of wind parks with variable speed wind turbines in power system dynamics simulations. In PSCC 2002 14th Power Systems Computation Conference (pp. 1-7). s.l.: s.n..

  Slootweg, JG, Kling, WL, Sluis, L van der & Haan, SWH de (2002). Integration of large scale wind parks in the Dutch power system: a comparison of the behaviour of constant and variable speed wind turbines. In CIGRE 2002 39th CIGRE Session. Paris: CIGRE.

  Slootweg, JG, Haan, SWH de, Polinder, H & Kling, WL (2002). Modeling new generation and storage technologies in power system dynamics simulations. In PES 2002 IEEE Power Engineering Society Summer Meeting (pp. 1-6). Piscataway, NJ. USA: IEEE.

  Slootweg, JG, Polinder, H & Kling, WL (2002). Reduced order models of actual wind turbine concepts. In Young Researchers Symposium in Electrical Power Engineering; Theme: Distributed Generation (pp. 1-7). s.l.: s.n..

  Waffenschmidt, E & Ferreira, JA (2002). Embedded passives integrated circuits for power converters. In PESC'02 33rd Annual IEEE Power Electronics Specialists Conference (pp. 1-6). Piscataway, NJ. USA: IEEE.

  Wijnbergen, S, Haan, SWH de & Slootweg, JG (2002). Pluf'n' play interface for renewable generators participating in grid voltage and frequency control. In AFRICON'02 2002 IEEE 6th AFRICON Conference in Africa Electrotechnological Services for Africa (pp. 579-584). Piscataway, NJ. USA: IEEE.

book - monograph - book editorial
  Hoeijmakers, MJ (2007). Elektrische omzettingen. Delft: VSSD.

  Hoeijmakers, MJ (2003). Elektrische omzettingen. Delft: DUP Blue Print.

part of book - chapter
  Bojanic, S, Pejovic, V, Caffarena, G, Milovanovic, V, Carrers, C & Popovi�, J (2009). Behavioural Biometrics Hardware Based on Bioinformatics Matching. In Computational Intelligence in Security for Information Systems, Volume 63 (pp. 171-178). Berlin / Heidelberg: Springer.

  Leuchter, J, Rerucha, V & Bauer, P (2009). The temperature effect of photovoltaic systems with dc-dc converters. In T Brezina & R Jablonski (Eds.), Recent advances in mechatronics (pp. 97-102). Berlin/Heidelberg: Springer Verlag.

  Maga, D, Sitar, J & Bauer, P (2009). Automatic control, design,and results of distance power electronic laboratories. In T Brezina & R Jablonski (Eds.), Recent advances in mechatronics (pp. 281-286). Berlin/Heidelberg: Springer Verlag.

  Bauer, P, Fedak, V & Hajek, V (2007). Practical application of e-learning in electrical engineering. In W Aung, Moscinski, M da Graca Rasteiro, I Rouse, B Wagner & P Willmot (Eds.), Innovations 2007 (pp. 311-319). Arlington: ineer.

  Haan, SWH de (2007). Circuitry and pulse shapes in pulsed electric fields treatment of food. In HLM Lelieveld, S Notermans & SWH de Haan (Eds.), Food preservation by pulsed electric fields: From research to application (pp. 43-69). Cambridge: Woodhead Publishing Limited.

  Lelieveld, HLM & Haan, SWH de (2007). Technologies related to pulsed electric field processing and their potential. In HLM Lelieveld, S Notermans & SWH de Haan (Eds.), Food preservation by pulsed electric fields: From research to application (pp. 300-306). Cambridge: Woodhead Publishing Limited.

  Roodenburg, B (2007). Electrochemistry in pulsed electric field treatment chambers. In HLM Lelieveld, S Notermans & SWH de Haan (Eds.), Food preservation by pulsed electric fields: From research to application (pp. 94-107). Cambridge: Woodhead publishing limited.

  Slootweg, JG, Polinder, H & Kling, WL (2005). Reduced-order modelling of wind turbines. In T Ackermann (Ed.), Wind power in power systems (pp. 555-585). Chichester: Wiley.

  Slootweg, JG, Haan, SWH de, Polinder, H & Kling, WL (2005). Wind power and voltage control. In T Ackermann (Ed.), Wind power in power systems (pp. 413-432). Chichester: Wiley.

book editorship
  Lelieveld, HLM, Notermans, S & Haan, SWH de (Eds.). (2007). Food preservation by pulsed electric fields. Cambridge: Woodhead publishing limited.

  Maga, D & Bauer, P (Eds.). (2007). State-of-art in mechatronics. Alphen aan den Rijn: Simulation Research Press.

journal editorship - referee
  Ferreira, JA (Eds.). (2005). Ieee transactions on power electronics, 20(3).

  Hassanizadeh, SM, Miller, CT, Parlange, MB, Sivapalan, M, Kumar, P & Harris, D (Eds.). (2001). Advances in water resources, 24 (spec).

external report
  Dijk, S van, Silverster, Sacha, Timmeren, A van, Beella, SK, Bauer, P & Quist, JN (2009). Schiphol the grounds 2030(scenario summary): integration of electric mobility into the built environment. Delft: TU Delft Valorisatie Centre.

  Bulder, B, Hendriks, HB, Lindenburg, C, Snel, H, Bauer, P, Polinder, H, Rooij, RPJOM van, Subroto, H & Zaayer, MB (2007). The Icorass feasibility study - final report. Petten: ECN.

  Gerber, MB & Ferreira, JA (2002). Analysis, design and loss modelling of a bi-directional DC/DC converter operating in DCM, including soft-switching. Delft: EPP.

  Gerber, MB & Ferreira, JA (2002). CCM operation of the DC/DC converter. Delft: EPP.

  Gerber, MB & Ferreira, JA (2002). High temperature, high density packaging. Delft: EPP.

  Gerber, MB & Ferreira, JA (2002). Report on capacitors for automotive applications as deliverable for the contract 'Framework for 3D integration project'. Delft: EPP.

  Gerber, MB & Ferreira, JA (2002). Switching waveforms and losses in the SPP100N08S2L-07 Mosfets for the 3D DC/DC converter. Delft: s.n..

  Holm, SR & Polinder, H (2002). Electrical actuators. Delft: EPP.

  Morren, J (2002). Grid of the future; comparison of possible electricity grids in future residences. Renewable Energy Interface (REIN) (Ext. rep. EPP2002003). Delft: Delft University of Technology/EPP.

  Polinder, H (2002). Linear generators for direct drive wave energy conversion. Delft: EPP.

  Polinder, H (2002). Linear machine design. Delft: EPP.

  Popovic, J (2002). Ceramics substrates and hybrid technologies; characteristics, potentials and suitability for TPS project. TPS project. Delft: EPP.

  Popovic, J (2002). Insulated metal substrates (IMS); characteristics, potentials and suitability for TPS project. TPS project. Delft: EPP.

  Popovic, J (2002). Inventory and cost mapping of current technology for power supplies used within Philips power solutions. Eindhoven: s.n..

  Popovic, J (2002). Low cost Flip Chip and LeadFrame technology for power applications. Eindhoven: s.n..

  Popovic, J (2002). Multilayer epoxy-based FR4; characteristics, potentials and suitability for TPS project. TPS project. Delft: EPP.

  Popovic, J (2002). Power packaging technologies - concepts and terms, directions for packaging consolidation. Delft: EPP.

  Popovic, J (2002). Technology classes in power applications. Eindhoven: s.n..

  Roodenburg, B (2002). Different topologies for the Riedel PEF pilot plant; an overview and considerations. Food preservation with Puls Electric Fields (P.E.F.) (Ext. rep. EPP2002005). Delft: EPP.

  Roodenburg, B, Haan, SWH de & Ferreira, JA (2002). Inventory and evaluation of power supply topologies for automotive plasma sources. Automotive RF source (Ext. rep. 12979). Delft: EPP.

inaugural speech
  Bauer, P (2007). Research and education of power electronics in 21st century. Inaugural speech Brno University of Technology (2008, May 19). Brno: Vutium.

other output
  leferink, F, Bergsma, H, Ferreira, JA & Etten, W.C. van (2004). High performance EMI filter for frequency converters. EMC Europe 2004; International symposium on electromagnetic compatibility: Eindhoven, The Netherlands (2004, September 6 - 2004, September 10).